Wetting and low temperature bonding of zirconia metallized with Sn0.3Ag0.7Cu-Ti alloys
Authors:
- H. BianHBH. Bian
- W. FuWFW. Fu
- Y.Z. LeiYLY.Z. Lei
- X.G. SongX.G. Song
- D. LiuDLD. Liu
- J. CaoJCJ. Cao
- J.C. FengJFJ.C. Feng
- 1 July 2018
- journal article
- research article
- Published by Elsevier in Ceramics International
- Vol. 44 (10) , 11456-11465
Abstract
No abstract availableKeywords
Funding Information
- National Natural Science Foundation of China (51775138, 51505105, U1537206)
- Key Research & Development program of Shandong Province (2017GGX40103)
This publication has 45 references indexed in Scilit:
- Interfacial microstructure and mechanical property of brazed copper/SiO2 ceramic jointVacuum, 2017
- Interfacial microstructure of partial transient liquid phase bonding of Si 3 N 4 to nickel-base superalloy using Ti/Au/Ni interlayersVacuum, 2016
- Microstructure and mechanical properties of Al 2 O 3 ceramic and Ti6Al4V alloy joint brazed with inactive Ag–Cu and Ag–Cu + BJournal of the European Ceramic Society, 2016
- An insight into microstructural evolution during plastic deformation in AA6061 alloy after friction welding with alumina-YSZ compositeMechanics of Materials, 2015
- Evaluation on diffusion bonded joints of TiAl alloy to Ti3SiC2 ceramic with and without Ni interlayer: Interfacial microstructure and mechanical propertiesMaterials & Design (1980-2015), 2014
- Brazing ZrO2 ceramic to Ti–6Al–4V alloy using NiCrSiB amorphous filler foil: Interfacial microstructure and joint propertiesMaterials Characterization, 2013
- Microstructural and mechanical properties of jointed ZrO2/Ti–6Al–4V alloy using Ti33Zr17Cu50 amorphous brazing fillerMaterials & Design (1980-2015), 2013
- Interfacial characterization of YSZ-to-steel joints with Ag–Cu–Pd interlayers for solid oxide fuel cell applicationsCeramics International, 2012
- Braze oxidation behavior and joint microstructure in YSZ/steel joints made using palladium brazes for SOFC applicationsMaterials Science and Engineering: A, 2008
- Joining of zirconia to zirconia using AgCuTi filler metalJournal of Materials Processing Technology, 1995