High-efficient adsorption and removal of elemental mercury from smelting flue gas by cobalt sulfide
Authors:
- 10 January 2019
- journal article
- research article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 26 (7) , 6735-6744
Abstract
Nonferrous metal smelting produces a large amount of Hg0 in flue gas, which has caused serious damage to the environment and human health. In this work, amorphous cobalt sulfide was synthesized by a liquid-phase precipitation method and was used for capturing gaseous Hg0 from simulated smelting flue gas at low temperatures (50~150 °C). In the adsorption process, Hg0 can be transformed into the stable mercury compound, which is confirmed to be HgS by X-ray photoelectron spectroscopy (XPS) and temperature programmed desorption of Hg (Hg-TPD) analysis. Meanwhile, XPS results also demonstrate that S22− species on the surface of cobalt sulfide play an important role in Hg0 transformation. At the temperature of 50 °C (inlet Hg0 concentration of 214 μg·m−3), the Hg0 adsorption capacity of cobalt sulfide (penetration rate of 25%) is as high as 2.07 mg·g−1, which is much higher than that of popular adsorbents such as activated carbons and metal oxides. In addition, it was found that the Hg0 removal efficiency by cobalt sulfide in the flue gas with high concentration of SO2 (5%) remained more than 94%. The good adsorption and Hg0 removal performance guarantee cobalt sulfide the great superiority and application potential in the treatment of Hg0 in smelting flue gas with high concentration of SO2.Keywords
Funding Information
- National Key R&D Program of China (2017YFC0210405)
- National Natural Science Foundation of China (51722407)
- Science and technology project of Hunan Province (2017RS3011)
- the Project of Innovation-driven Plan in Central South University (2019CX009)
This publication has 36 references indexed in Scilit:
- Mercury as a Global Pollutant: Sources, Pathways, and EffectsEnvironmental Science & Technology, 2013
- Review of technologies for mercury removal from flue gas from cement production processesProgress in Energy and Combustion Science, 2012
- Mercury pollution in Asia: A review of the contaminated sitesJournal of Hazardous Materials, 2009
- Mercury Emissions Control in Coal Combustion Systems Using Potassium Iodide: Bench-Scale and Pilot-Scale StudiesEnergy & Fuels, 2009
- Characterization of fly ash from full-scale demonstration of sorbent injection for mercury control on coal-fired power plantsFuel Processing Technology, 2004
- Mercury Adsorption Properties of Sulfur-Impregnated AdsorbentsJournal of Environmental Engineering, 2002
- Removal of mercury in flue gas by the reaction with sulfide compoundsToxicological & Environmental Chemistry, 1999
- Kinetics of Vapor-Phase Mercury Uptake by Virgin and Sulfur-Impregnated Activated CarbonsJournal of the Air & Waste Management Association, 1998
- Sorption of Elemental Mercury by Activated CarbonsEnvironmental Science & Technology, 1994
- Transformation processes involving mercury species in the atmosphere — results from a literature surveyWater, Air, & Soil Pollution, 1991