An Investigation into the Use of Manufactured Sand as a 100% Replacement for Fine Aggregate in Concrete
Open Access
Abstract
Manufactured sand differs from natural sea and river dredged sand in its physical and mineralogical properties. These can be both beneficial and detrimental to the fresh and hardened properties of concrete. This paper presents the results of a laboratory study in which manufactured sand produced in an industry sized crushing plant was characterised with respect to its physical and mineralogical properties. The influence of these characteristics on concrete workability and strength, when manufactured sand completely replaced natural sand in concrete, was investigated and modelled using artificial neural networks (ANN). The results show that the manufactured sand concrete made in this study generally requires a higher water/cement (w/c) ratio for workability equal to that of natural sand concrete due to the higher angularity of the manufactured sand particles. Water reducing admixtures can be used to compensate for this if the manufactured sand does not contain clay particles. At the same w/c ratio, the compressive and flexural strength of manufactured sand concrete exceeds that of natural sand concrete. ANN proved a valuable and reliable method of predicting concrete strength and workability based on the properties of the fine aggregate (FA) and the concrete mix composition.Keywords
This publication has 19 references indexed in Scilit:
- Prediction of compressive strength of recycled aggregate concrete using artificial neural networksConstruction and Building Materials, 2013
- Use of limestone sands and fillers in concrete without superplasticizerCement and Concrete Composites, 2012
- Influence of manufactured sand characteristics on strength and abrasion resistance of pavement cement concreteConstruction and Building Materials, 2011
- Effect of the Methylene Blue Value of Manufactured Sand on Performances of ConcreteJournal of Advanced Concrete Technology, 2011
- Neural networks for predicting compressive strength of structural light weight concreteConstruction and Building Materials, 2009
- Influence of Clays and Clay-Sized Particles on Concrete PerformanceJournal of Materials in Civil Engineering, 2007
- Comparison of natural and manufactured fine aggregates in cement mortarsCement and Concrete Research, 2007
- Estimation of the filler content required to minimise voids ratio in concreteMagazine of Concrete Research, 2003
- Mixture-proportioning of high-performance concreteCement and Concrete Research, 2002
- Effects of crushed stone dust on some properties of concreteCement and Concrete Research, 1996