Sequence effects on the life estimation of thin-walled welded tubular structures made of HSS + UHSS under bending
Open Access
- 12 December 2022
- journal article
- research article
- Published by Springer Nature in Welding in the World
- Vol. 67 (3) , 683-705
Abstract
Welded hollow sections are typical in different industries. A database of fatigue life data of welded hollow section joints covering sequence effects and the accuracy of the linear damage accumulation is presented. The effects of the shape of the applied load spectra, sequence effects of different amplitudes have been investigated using two high-strength steels. This document covers thin-walled tubes of 2-mm thickness made of low-carbon or mild steel 1.8849 (S460MH) and austenitic TWIP-steel 1.4678 + CP700 (X30MnCrN16-14). Constant amplitude and two-level load spectra are presented to check the linear damage accumulation. Using stress concentration factors from finite element analysis, typical FAT classes for the structural and the effective notch stress concepts are checked as well. Both structures show much higher strength compared IIW recommendations by structural stress approach and DVS 0905 by effective notch stress approach. Typical maximum linear damage sums taken from recommendations and codes of 0.2 or 0.5 are exceeded for all spectra investigated and in some of the cases even significantly above 1.0. Transferability of the recommendations to component type structures like those tubular joints made of high-strength steel needs revision to lift its lightweight potential but this will require additional data.Keywords
Funding Information
- Hochschule für angewandte Wissenschaften München
This publication has 16 references indexed in Scilit:
- Effiziente rechnerunterstützte Entwicklung von Karosseriekonzepten2016
- Recommendations for Fatigue Design of Welded Joints and Components2016
- Classification of Load Sequence Effects in Metallic StructuresProcedia Engineering, 2015
- Verbesserung der Lebensdauerabschätzung durch Berücksichtigung des LebensdauervielfachenMaterialwissenschaft und Werkstofftechnik, 2012
- Fatigue assessment of welded structures: practical aspects for stress analysis and fatigue assessmentFatigue & Fracture of Engineering Materials & Structures, 2010
- Load interaction effects during fatigue crack growth under variable amplitude loading—a literature review. Part II: qualitative interpretationFatigue & Fracture of Engineering Materials & Structures, 1999
- LOAD INTERACTION EFFECTS DURING FATIGUE CRACK GROWTH UNDER VARIABLE AMPLITUDE LOADING—A LITERATURE REVIEW. PART I: EMPIRICAL TRENDSFatigue & Fracture of Engineering Materials & Structures, 1998
- Re-examination of cumulative fatigue damage analysis—an engineering perspectiveEngineering Fracture Mechanics, 1986
- Practical implementation of the double linear damage rule and damage curve approach for treating cumulative fatigue damageInternational Journal of Fracture, 1981
- A Cumulative Damage Rule Based on the Knee Point of the S-N CurveJournal of Engineering Materials and Technology, 1976