Positioning of an isothermal heat storage layer in a building wall exposed to the external environment
- 17 November 2015
- journal article
- research article
- Published by Taylor & Francis in Journal of Building Performance Simulation
- Vol. 9 (5) , 542-554
Abstract
The paper presents an idea for the enhancement of a building's thermal insulation component by adding into the structure a thin layer of a phase-change material (PCM). The proposed solution can be dedicated, for example, to an external partition of lightweight construction. The capacity for latent heat storage allowed it to stabilize the temperature inside the insulation layer in a daily cycle and to minimize the temperature difference between the internal and external surfaces. In this paper, different positions of a PCM layer in the thermal insulation of an external wall were analysed. The main goal of this work was to find the best position of the PCM layer, taking into account the indoor temperature and the meteorological conditions. The authors propose two parameters: the amount of stored energy and the dynamism of the charging/discharging processes. Taking into account large temperature fluctuations on the external surface during summer and winter, it was concluded that, for this specific case, the most appropriate solution would be an external position of the PCM with a melting temperature of 20°C.Keywords
Funding Information
- The National Centre for Research and Development (WPN/5/2013)
This publication has 22 references indexed in Scilit:
- Thermal load mitigation and passive cooling in residential attics containing PCM-enhanced insulationsSolar Energy, 2014
- On the importance of the location of PCMs in building walls for enhanced thermal performanceApplied Energy, 2013
- A multi-level modelling and evaluation of thermal performance of phase-change materials in buildingsJournal of Building Performance Simulation, 2013
- Dynamic thermal performance analysis of fiber insulations containing bio-based phase change materials (PCMs)Energy and Buildings, 2012
- Materials used as PCM in thermal energy storage in buildings: A reviewRenewable and Sustainable Energy Reviews, 2011
- Development and validation of a new TRNSYS type for the simulation of external building walls containing PCMEnergy and Buildings, 2010
- Numerical and experimental analyses of PCM containing sandwich panels for prefabricated wallsEnergy and Buildings, 2006
- Numerical modelling and thermal simulation of PCM–gypsum composites with ESP-rEnergy and Buildings, 2004
- Development of a thermally activated ceiling panel with PCM for application in lightweight and retrofitted buildingsEnergy and Buildings, 2004
- Numerical methods in phase-change problemsArchives of Computational Methods in Engineering, 1994