Oxygen-enriched decoupled gasification of biomass in a fluidized-bed reactor for high-quality syngas production
Authors:
- Weiwei WangWWWeiwei Wang
- Zihao ZhangZZZihao Zhang
- Zeng LiuZLZeng Liu
- Shuailin MouSMShuailin Mou
- Dominic YellezuomeDYDominic Yellezuome
- Zhiqi WangZWZhiqi Wang
- Ruidong ZhaoRZRuidong Zhao
- Tianju ChenTCTianju Chen
- Jinhu WuJWJinhu Wu
Preprint
- 24 September 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
Integrating oxygen‑enriched decoupled gasification with carbonization pretreatment offers a promising strategy for overcoming the persistent trade‑off between tar suppression and syngas quality during biomass conversion. In this study, oxygen‑enriched decoupled gasification of walnut shell was systematically investigated in a fluidized‑bed reactor. The thermal behavior and tar evolution during pyrolysis were characterized using TG‑FTIR and Py‑GC/MS, while the syngas composition was analyzed by GC. During the pyrolysis stage (Stage I), increasing the temperature from 800 to 900 ºC enhanced secondary cracking and deoxygenation, promoting the formation of stable aromatic tar compounds, including toluene, naphthalene, and pyrene. During the gasification stage (Stage II), oxygen‑enriched gasification at an equivalence ratio of 0.3 produced syngas containing 60.3–69.0 vol% H2+CO at 900 ºC. Increasing the steam addition from 0.14 to 0.23 kg kg-1 shifted the syngas composition toward higher H2 (33.8→44.3 vol%) and lower CO (32.9→16.0 vol%) contents, thereby increasing the H2/CO molar ratio from 1.02 to 2.77. Meanwhile, the H2 yield increased from 0.432 to 0.759 Nm3 kg-1, while carbon conversion efficiency improved from 89.0% to 96.2%. The cold gas efficiency increased from 67.4% to 78.7%. These findings demonstrate that steam addition is an effective parameter for tailoring syngas composition to meet downstream application requirements while maintaining high gasification efficiency, highlighting the potential of oxygen-enriched decoupled gasification for high‑quality syngas production from biomass.Keywords
This publication has 22 references indexed in Scilit:
- Cutting-edge biomass gasification technologies for renewable energy generation and achieving net zero emissionsEnergy Conversion and Management, 2024
- Efficient extraction of lignin from moso bamboo by microwave-assisted ternary deep eutectic solvent pretreatment for enhanced enzymatic hydrolysisBioresource Technology, 2024
- Recent progress of the transition metal-based catalysts in the catalytic biomass gasification: A mini-reviewFuel, 2023
- A comprehensive review of primary strategies for tar removal in biomass gasificationEnergy Conversion and Management, 2022
- Synergy of ball milling, microwave irradiation, and deep eutectic solvents for a rapid and selective delignification: walnut shells as model for lignin-enriched recalcitrant biomassBiomass Conversion and Biorefinery, 2022
- Insight into biomass pyrolysis mechanism based on cellulose, hemicellulose, and lignin: Evolution of volatiles and kinetics, elucidation of reaction pathways, and characterization of gas, biochar and bio‐oilCombustion and Flame, 2022
- Oxygen-enriched gasification of lignocellulosic biomass: Syngas analysis, physicochemical characteristics of the carbon-rich material and its utilization as an anode in lithium ion batteryEnergy, 2020
- Pyrolysis of water hyacinth biomass parts: Bioenergy, gas emissions, and by-products using TG-FTIR and Py-GC/MS analysesEnergy Conversion and Management, 2020
- Slow pyrolysis of chemically treated walnut shell for valuable products: Effect of process parameters and in-depth product analysisEnergy, 2019
- Reaction decoupling in thermochemical fuel conversion and technical progress based on decoupling using fluidized bedCarbon Resources Conversion, 2018