Next‐Generation Additive Manufacturing: Tailorable Graphene/Polylactic(acid) Filaments Allow the Fabrication of 3D Printable Porous Anodes for Utilisation within Lithium‐Ion Batteries
Open Access
- 2 April 2019
- journal article
- research article
- Published by Wiley in Batteries & Supercaps
- Vol. 2 (5) , 448-453
Abstract
Herein, we report the fabrication and application of Li‐ion anodes for utilisation within Li‐ion batteries, which are fabricated via additive manufacturing/3D printing (fused deposition modelling) using a bespoke graphene/polylactic acid (PLA) filament, where the graphene content can be readily tailored and controlled over the range 1–40 wt. %. We demonstrate that a graphene content of 20 wt. % exhibits sufficient conductivity and critically, effective 3D printability for the rapid manufacturing of 3D printed freestanding anodes (3DAs); simplifying the components of the Li‐ion battery negating the need for a copper current collector. The 3DAs are physicochemically and electrochemically characterised and possess sufficient conductivity for electrochemical studies. Critically, it is found that if the 3DAs are used in Li‐ion batteries the specific capacity is very poor but can be significantly improved through the use of a chemical pre‐treatment. Such treatment induces an increased porosity, which results in a 200‐fold increase (after anode stabilisation) of the specific capacity (ca. 500 mAh g−1 at a current density of 40 mA g−1). This work significantly enhances the field of additive manufacturing/3D printed graphene based energy storage devices demonstrating that useful 3D printable batteries can be realised.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/N001877/1)
This publication has 24 references indexed in Scilit:
- Reduction of graphene oxide – a comprehensive electrochemical investigation in alkaline and acidic electrolytesRSC Advances, 2014
- 3D Printing of Interdigitated Li‐Ion Microbattery ArchitecturesAdvanced Materials, 2013
- Raman Spectroscopy Study of Rotated Double-Layer Graphene: Misorientation-Angle Dependence of Electronic StructurePhysical Review Letters, 2012
- Graphene nanosheets for enhanced lithium storage in lithium ion batteriesCarbon, 2009
- Nanomaterialien für wiederaufladbare LithiumbatterienAngewandte Chemie, 2008
- Nanomaterials for Rechargeable Lithium BatteriesAngewandte Chemie International Edition, 2008
- Nanostructured materials for advanced energy conversion and storage devicesNature Materials, 2005
- The transport limited currents at insonated electrodesPhysical Chemistry Chemical Physics, 2004
- An Extended Method for the Practical Evaluation of the Standard Rate Constant from Cyclic Voltammetric DataElectroanalysis, 2004
- Theory and Application of Cyclic Voltammetry for Measurement of Electrode Reaction Kinetics.Analytical Chemistry, 1965