Real‐Time Monitoring of Thermal Cycling Damage in Ceramic Matrix Composites Under a Constant Stress
Authors:
- 3 July 2007
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 90 (7) , 2135-2142
Abstract
Under a constant stress of 50 MPa, a thermal strain with a range of 0.2% was measured on a carbon‐fiber‐reinforced SiC‐matrix composite (C/SiC) subjected to thermal cycling between 700° and 1200°C. Acoustic emission (AE) technology was implemented to assist in monitoring the occurrence of damage during testing. The monitored AE signals, together with the measured strain, were shown to have a significant dependence on temperature in a single cycle and to change periodically with repetitive temperature. In a single cycle, the cycled specimens emitted fewer acoustic emissions during heating, but as the cooling stage approached, the emission rate increased dramatically. As the cycle proceeded, the AE energy increased stepwise, whereas this stepwise increment per cycle continuously decreased until finally it nearly disappeared at 15 cycles, after which no further increase in thermal cycle creep strain was observed with a rate of zero, and the measured coating crack density reached a stable value of about 5.0 mm‐1.Keywords
This publication has 51 references indexed in Scilit:
- Mechanical property degradation of a Nicalon fiber reinforced SiNC ceramic matrix composite under thermal shock loadingComposite Structures, 2007
- A study on the failure detection of composite materials using an acoustic emissionComposite Structures, 2006
- Thermal Cycling Damage Mechanisms of C/SiC Composites in Displacement Constraint and Oxidizing AtmosphereJournal of the American Ceramic Society, 2006
- Advanced ceramic matrix composite materials for current and future propulsion technology applicationsActa Astronautica, 2004
- Thermal shock behavior of 3-dimensional C/SiC compositeCarbon, 2002
- Toughness characterization and acoustic emission monitoring of a 2-D carbon/carbon compositeEngineering Fracture Mechanics, 2001
- Classification of Microfracture Process Type in Glass Matrix Composites by Quantitative Acoustic Emission MethodMATERIALS TRANSACTIONS, 2001
- Failure mechanisms analysis of 2D carbon/carbon using acoustic emission monitoringNDT & E International, 1998
- Interfacial Debonding Behavior of Mullite/SiC Continuous Fiber CompositeJournal of the American Ceramic Society, 1995
- Factors Affecting Thermal Stress Resistance of Ceramic MaterialsJournal of the American Ceramic Society, 1955