Fracture-Toughness Evaluation of Solution Heat-Treated Zr-2.5Nb Alloys as per ASTM and ISO Standards
- 1 July 2016
- journal article
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 44 (4) , 1542-1557
Abstract
In the present work, fracture-toughness parameters of Zr-2.5Nb alloy were evaluated as per ASTM E1820 and ISO 12135 standards at 25°C and 300°C. To investigate the influence of the material's microstructure on deviation in fracture-toughness values, Zr-2.5Nb alloy plates were individually water quenched from three soaking temperatures; 850°C, 870°C, and 890°C with 15- and 30-min soaking durations. Under these six conditions, fracture resistance, J-R curves derived from these standards exhibited marginal deviations. However, slope of valid J-R curve region (dJ/da) obtained by two methods had appreciable differences, especially at 300°C.Keywords
This publication has 21 references indexed in Scilit:
- Influence of hydrogen content on fracture toughness of CWSR Zr–2.5Nb pressure tube alloyJournal of Nuclear Materials, 2013
- Development of Pressure Tubes with Service Life Greater Than 30 Years1996
- Fabrication of Zr-2.5Nb Pressure Tubes to Minimize the Harmful Effects of Trace Elements1994
- VALIDATION OF THE FRACTURE MECHANICS TEST METHOD EGF P1–87D (ESIS P1–90/ESIS P1–92): ANALYSIS OF AN EXPERIMENTAL ROUND ROBINFatigue & Fracture of Engineering Materials & Structures, 1993
- Jc DETERMINATION FOR SHALLOW NOTCH WELDED BEND SPECIMENSFatigue & Fracture of Engineering Materials & Structures, 1987
- Pressure Tube Development for CANDU Reactors1984
- Application of the Electrical Potential Method to Crack Length Measurements Using Johnson's FormulaJournal of Testing and Evaluation, 1981
- Application of the ac potential drop technique to the determination of curves of tough ferritic steelsEngineering Fracture Mechanics, 1981
- Estimations on J-Integral and Tearing Modulus T from a Single Specimen Test Record1981
- Review and extension of compliance information for common crack growth specimensInternational Journal of Fracture, 1978