Effects of hygrothermal aging on the fracture and failure behavior in short glass fiber‐reinforced, toughened poly(butylene terephthalate) composites
- 1 December 1996
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 17 (6) , 900-909
Abstract
The fracture response of injection molded short glass fiber (GF) reinforced and rubber‐toughened poly(butylene terephthalate) (PBT) composites has been characterized by the fracture toughness (Kc) and energy (Gc), measured on static‐loaded compact tension (CT) specimens. The related failure of the composites with 30 wt% GF reinforcement in as‐received (AR), hygrothermally aged (HA) and re‐dried (RD) states, respectively, was studied by acoustic emission (AE) and fractography. Tougheners were functionalized ethylene/acrylate (EAF), crosslinked acrylate (XAR) and core‐shell type (CSR) rubbers, at 20 wt% in the composites. It was shown that both Kc and Gc decrease with hygrothermal aging at 90°C, and their values cannot be restored by subsequent drying. This is attributed to severe hydrolysis degradation of the PBT matrix. Deterioration in the fracture parameters was affected by the composition of the rubbery toughener: The toughness retention by EAF was superior to the other modifiers. The difference in the failure mode of the GF‐PBT composites before and after hygrothermal aging was revealed by viewing the fracture surface of the CT‐specimens in scanning electron microscope (SEM). Based on the fractographic results, changes in the AE amplitude envelopes are interpreted and discussed.Keywords
This publication has 12 references indexed in Scilit:
- On the failure mode in dry and hygrothermally aged short fiber-reinforced injection-molded polyarylamide composites by acoustic emissionApplied Composite Materials, 1995
- Comparison of the fracture and failure behavior of polypropylene composites reinforced by long glass fibers and by glass matsComposites Science and Technology, 1995
- Fracture behaviour of long fibre reinforced thermoplasticsJournal of Materials Science, 1994
- Effect of moisture absorption on the tensile properties of short glass fiber reinforced poly(butylene terephthalate)Polymer Engineering & Science, 1994
- Fracture toughness and fracture mechanisms of PBT/PC/IM blendJournal of Materials Science, 1993
- Toughened Semicrystalline Engineering Polymers1993
- Characteristics of acoustic emission during the damage process in notched short-fibre-reinforced thermoplasticsNDT & E International, 1992
- Microstructure and Fracture Mechanical Performance of Short-Fibre Reinforced Thermoplastics1989
- Fatigue crack propagation in glass-fibre and glass-sphere filled PBT compositesInternational Journal of Fatigue, 1988
- Acoustic emission of single notched short carbon fiber reinforced nylon 6 (FRPT) under constant tensile loadEngineering Fracture Mechanics, 1985