Insights into the reinforcement and mechanism of silicone mold rubber co-modified with WCB and MMQ resin
Authors:
- Rui ZhouRZRui Zhou
- Hongxi ZhangHZHongxi Zhang
Open Access
- 17 February 2021
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 8 (3) , 035201
Abstract
The exploitation of condensation room-temperature vulcanized silicone rubber (C-RTV) with excellent mechanical properties and thermal stability is of great practical significance in the preparation of insulation materials and rubber products with high performance. In this work, novel silicone rubber was fabricated successfully by adding white carbon black (WCB) and different percentages of methyl MQ (MMQ) silicone resin to C-RTV silicone mold rubbers (C-RTV/WMMQ). The mechanical properties, dimensional thermal stabilities, and thermal decomposing temperatures of the as-prepared samples were investigated in detail. Compared to the primitive C-RTV, the tensile strength of the sample with the WCB adding an amount of 15% increased from 0.44 MPa to 3.9 MPa. When the 1% MMQ was introduced, the tensile strength further increased to 4.4 MPa, suggesting a 12.8% reinforcement rate in addition to the improvements in the dimensional thermal stabilities and decomposing temperature. Based on the experimental results, a feasible synergistic effect and compatibility mechanism was proposed that hydrogen bond formed on the interface between MMQ resin and C-RTV in addition to the rigid structure of WCB, and thus led to a dense crosslinking network structure in the polymer matrix.Keywords
Funding Information
- National Natural Science Foundation of China (52000011)
This publication has 36 references indexed in Scilit:
- Properties of functionalized graphene/room temperature vulcanized silicone rubber composites prepared by an In-situ reduction methodJournal of Wuhan University of Technology-Mater. Sci. Ed., 2013
- Synthesis and characterization of titania/MQ silicone resin hybrid nanocomposite via sol–gel processJournal of Sol-Gel Science and Technology, 2011
- Preparation, microstructure, and property of silicon rubber/organically modified montmorillonite nanocomposites and silicon rubber/OMMT/fumed silica ternary nanocompositesPolymer Composites, 2011
- Effect on cooling time in soft tooling process using particle reinforcement with polyurethane mould materialInternational Journal of Rapid Manufacturing, 2011
- Resistive viscoelasticity of silicone rubber/carbon black compositePolymer Composites, 2010
- Thermal behaviour and mechanical properties of novel RTV silicone rubbers using divinyl-hexa[(trimethoxysilyl)ethyl]-POSS as cross-linkerPolymer Degradation and Stability, 2010
- Influence of carbon black concentration on piezoresistivity for carbon-black-filled silicone rubber compositeCarbon, 2009
- Some Issues in Rubber Nanocomposites: New Opportunities for Silicone MaterialsSilicon, 2009
- Organo-montmorillonite as substitute of carbon black in natural rubber compoundsPolymer, 2003
- Synthesis of MQ silicone resins through hydrolytic condensation of ethyl polysilicate and hexamethyldisiloxaneJournal of Applied Polymer Science, 1998