In vitro evaluation of the influence of titanium nitride coating on the retention force between components of two-part abutments
Open Access
- 2 June 2021
- journal article
- research article
- Published by Springer Nature in BMC Oral Health
- Vol. 21 (1) , 1-9
Abstract
Background: Two-part abutments are typically made up of a base composed of titanium and a ceramic build-up. The long-term outcomes are affected by the mechanical durability. The purpose of the present investigation was to evaluate and compare the retention force of two-part abutment systems with titanium or titanium nitride bases—as fixed with zirconia components and with various surface treatments. Methods: A total of 60 two-part abutments were investigated—with a titanium base (n = 30) or titanium nitride coated bases (n = 30) and bonded with zirconia ceramic build-ups. The bonding surfaces were treated with aluminium oxide blasting, with an average particle size of 110 µm. The titanium bases were then pretreated with Alloy Primer or Clearfil Ceramic Primer. The ceramic build-ups were only treated with Clearfil Ceramic Primer. For twenty test specimens, no chemical pretreatment was performed. Test specimens were classified into six groups in accordance with the pretreatment (A–F; n = 10). A resin-based luting agent was employed to attach the two parts. Specimens were then subjected to artificial thermal aging (104 cycles with 5 °C/55 °C). The retention force between the two parts was then investigated with a pull-off test. The findings were analyzed by ANOVA statistics. Fracture patterns were examined by electron microscopy. Results: In the absence of primer, titanium nitride coated bases gave significantly greater retention forces than other samples (p < 0.05). Chemical preconditioning with silane coupling agents did not effect on the retention force of coated bases. Conclusions: The results of the current study suggested that modifying metal surfaces by coating the base with titanium nitride not only has esthetic and biological advantages, but also enhances the mechanical properties of the adhesive bond of two-part abutments.Keywords
Funding Information
- Medizinische Hochschule Hannover (MHH)
This publication has 41 references indexed in Scilit:
- Influence of hydrothermal and mechanical conditions on the strength of zirconiaActa Biomaterialia, 2010
- Surface Conditioning Influences Zirconia Ceramic BondingJournal of Dental Research, 2009
- Zirconia: Established facts and perspectives for a biomaterial in dental implantologyJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2008
- An overview of zirconia ceramics: Basic properties and clinical applicationsJournal of Dentistry, 2007
- Optical phenomenon of peri‐implant soft tissue. Part I. Spectrophotometric assessment of natural tooth gingiva and peri‐implant mucosaClinical Oral Implants Research, 2007
- Load‐bearing capacity of all‐ceramic posterior four‐unit fixed partial dentures with different zirconia frameworksEuropean Journal of Oral Sciences, 2007
- Shear bond strength of veneering composite resin to titanium nitride coating alloy deposited by radiofrequency sputteringJournal of Dentistry, 2006
- The effects of XeCl laser etching of Ni–Cr alloy on bond strengths to composite resin: a comparison with sandblasting proceduresDental Materials, 2005
- Effect of sandblasting on the long‐term performance of dental ceramicsJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2004
- Characteristics and porcelain bond strength of (Ti,Al)N coating on dental alloysJournal of Biomedical Materials Research, 2002