Transition of Roughness Evolution in Cu–In Alloy Films by the Formation of Intermetallic Compounds
Authors:
- Takeo NakanoTNTakeo Nakano
- Hiroshi MizuhashiHMHiroshi Mizuhashi
- Shigeru BabaSBShigeru Baba
- 1 April 2005
- journal article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 44 (4R)
Abstract
The evolution of the surface morphology of Cu–In alloy film has been studied using an atomic force microscope. Samples of Cu–In were prepared by sequential vacuum deposition: copper was deposited to 10–40 nm thick first on a glass substrate, followed by the deposition of various amounts of indium to make the indium composition in the range of 0–75 at.%. Samples were prepared under three different conditions: A) deposited at room temperature (RT); B) deposited at RT and annealed at 120°C in vacuo; and C) deposited at 120°C. Samples formed by A and B (series A and B) showed a growth with a dynamical exponent β of ∼0.3 while the atomic ratio In/Cu was less than 2. The formation of CuIn2 intermetallic compound was observed by X-ray diffraction as the atomic ratio approached 2. After that, β suddenly increased to ∼0.7, which was attributed to the segregation of excess indium atoms to form cap-shaped islands. For samples grown by C (series C), the roughness initially increased more rapidly with β∼0.7 and decreased above In/Cu∼1. It showed a minimum at In/Cu=2 and finally increased again with β∼0.7 by forming indium islands, as in series A and B.Keywords
This publication has 22 references indexed in Scilit:
- Sulfurization of Cu/In Precursors for CuInS[sub 2]-Based Solar CellsJournal of the Electrochemical Society, 2003
- Synthesis of CuInS2 films by sulphurization of Cu/In stacked elemental layersSolar Energy Materials and Solar Cells, 2000
- Precursor modification for preparation of CIS films by selenization techniqueSolar Energy Materials and Solar Cells, 1998
- Kinetics of intermetallics transformation in sputtered CuIn alloys studied by electrical resistance measurementsSolid State Communications, 1995
- Study of the selenium incorporation in sputtered Cu, in alloysSolar Energy Materials and Solar Cells, 1994
- Structural characterization of the CuIn intermetallic phase produced by interfacial reactions in Cu/In bimetallic filmsThin Solid Films, 1993
- The formation of intermetallics in Cu/In thin filmsJournal of Materials Research, 1992
- Studies of compound formation at CuIn, AgIn and AuIn interfaces with perturbed γ-γ angular correlationsThin Solid Films, 1986
- Compound Formation at Cu-In Thin-Film Interfaces Detected by PerturbedAngular CorrelationsPhysical Review Letters, 1985
- Room temperature interactions in copper-metal thin film couplesJournal of the Less Common Metals, 1980