The Anodic Polarization Behavior of Fe-Ni-P-B and Fe-Ni-Cr-P-B Amorphous Alloys
Authors:
- 1 November 1984
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 40 (11) , 619-624
Abstract
The anodic polarization of Metglas™ 2826 (Fe-40Ni-14P-6B) and Metglas 2826A (Fe-36Ni-14Cr-12P-6B) has been studied by standard electrochemical techniques, ellipsometry, and the surface analysis techniques of Auger electron spectroscopy (AES) and electron spectroscopy for chemical analysis (ESCA). The polarization behavior of the Cr-containing alloy suggests a typically passive material. A thin, protective Cr rich film forms at potentials between open circuit (0 mV) and 1000 mV (SCE). At transpassive potentials, Cr dissolution occurs, and the film thickness increases. The apparent active-passive behavior of the Cr-free material appears to be associated with two separate regions of film growth. At more noble potentials, an iron rich film is produced. At more active potentials, the film is nickel rich and much less protective. This behavior is presumably related to the polarization behavior of Ni-P and Fe-P alloys, which indicates that Fe-P can be passivated and Ni-P cannot.Keywords
This publication has 10 references indexed in Scilit:
- Electrochemical (Corrosion) Behavior of Amorphous/Microcrystalline Ion Plated Fe-Cr Alloy FilmsCorrosion, 1982
- Examination of Passive Films on Iron-Nickel Alloys by Auger Electron SpectroscopyCorrosion, 1981
- Chemistry of corrosion layers on amorphous FeNiCrPB alloysJournal of Vacuum Science and Technology, 1981
- Studies of the influence of sulphur on the passivation of nickel by Auger electron spectroscopy and electron spectroscopy for chemical analysisMaterials Science and Engineering, 1980
- Chemical Properties of Amorphous MetalsAnnual Review of Materials Science, 1978
- Effect of metalloidal elements on corrosion resistance of amorphous iron-chromium alloysJournal of Non-Crystalline Solids, 1978
- In-depth profiles of anodic oxide films on FeNi alloy in boric acid-sodium borate solutionsCorrosion Science, 1978
- Extremely high corrosion resistance of chromium-containing amorphous iron alloysMaterials Science and Engineering, 1976
- High Corrosion Resistance of Chromium-Bearing Amorphous Iron Alloys in Neutral and Acidic Solutions Containing ChlorideCorrosion, 1976
- A Fortran program for analysis of ellipsometer measurements1969