Highly conductive fluorine-based anion exchange membranes with robust alkaline durability
- 11 June 2020
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 8 (26) , 13065-13076
Abstract
Anion exchange membranes (AEMs) with robust alkaline stability and high ionic conductivity are imminently required for the promising electrochemical energy conversion devices – fuel cells. Herein, a series of novel crosslinked AEMs with hydrophobic fluorine-based polymer backbones bearing special functional sites and hydrophilic long flexible multi-cation side chains are prepared. Morphology observation and ion transport analysis confirm the existence of distinct microphase separation and efficient ion-conducting channels within the membranes resulting from the inherent chemical structure. A highest ionic conductivity of 136.27 mS cm−1 can be achieved by TQ-PDBA-70% (IEC = 2.16 meq. g−1) at 80 °C. Meanwhile, the prepared TQ-PDBA-X AEMs exhibit a desirable swelling ratio ( 22.8 MPa). It is worth noting that the retained ionic conductivity of the TQ-PDBA-70% AEM is 98.14%, 95.50%, 77.90%, 72.02% and 58.15% after being immersed in 1, 2, 4, 8 and 10 M KOH at 80 °C for 1000 h, respectively. Chemical structure change of the TQ-PDBA-70% AEM before and after the alkaline stability test is negligible, as revealed by FT-IR. Moreover, TQ-PDBA-70% has high ionic exchange capacity (IEC) retention and maintains good mechanical properties. A single cell assembled with TQ-PDBA-70% has a maximum power density of 158.8 mW cm−2 under a current density of 360 mA cm−2. These results suggest that this type of structure opens a new strategy for developing high performance AEMs.Keywords
Funding Information
- National Natural Science Foundation of China (21878252, 21736009)
This publication has 60 references indexed in Scilit:
- Highly Stable, Anion Conductive, Comb-Shaped Copolymers for Alkaline Fuel CellsJournal of the American Chemical Society, 2013
- Quaternized poly(arylene ether) ionomers containing triphenyl methane groups for alkaline anion exchange membranesJournal of Materials Chemistry A, 2013
- Ion Motion in Anion and Proton-Conducting Triblock CopolymersMacromolecules, 2013
- Synthesis and characterization of cross-linked poly(arylene ether ketone) containing pendant quaternary ammonium groups for anion-exchange membranesJournal of Membrane Science, 2012
- Stable fluorinated sulfonated poly(arylene ether) membranes for vanadium redox flow batteriesRSC Advances, 2012
- Improved gas diffusion electrodes for hybrid polymer electrolyte fuel cellsElectrochimica Acta, 2011
- Self-crosslinking for dimensionally stable and solvent-resistant quaternary phosphonium based hydroxide exchange membranesChemical Communications, 2011
- Crosslinked sulfonated poly(ether ether ketone) proton exchange membranes for direct methanol fuel cell applicationsJournal of Power Sources, 2007
- Polyelectrolyte Complexes of Chitosan and Poly(acrylic acid) As Proton Exchange Membranes for Fuel CellsMacromolecules, 2004
- Ion Transport in Silica Nanocomposite ElectrolytesJournal of the Electrochemical Society, 2003