Shape Sensing with Rayleigh Backscattering Fibre Optic Sensor
Open Access
Abstract
In this paper, Rayleigh backscattering sensors (RBS) are used to realize shape sensing of beam-like structures. Compared to conventional shape sensing systems based on fibre Bragg grating (FBG) sensors, RBS are capable of continuous lateral sensing. Compared to other types of distributed fibre optic sensors (FOS), RBS have a higher spatial resolution. First, the RBS’s strain sensing accuracy is validated by an experiment comparing it with strain gauge response. After that, two shape sensing algorithms (the coordinate transformation method (CTM) and the strain-deflection equation method (SDEM)) based on the distributed FOS’ input strain data are derived. The algorithms are then optimized according to the distributed FOS’ features, to make it applicable to complex and/or combine loading situations while maintaining high reliability in case of sensing part malfunction. Numerical simulations are carried out to validate the algorithms’ accuracy and compare their accuracy. The simulation shows that compared to the FBG-based system, the RBS system has a better performance in configuring the shape when the structure is under complex loading. Finally, a validation experiment is conducted in which the RBS-based shape sensing system is used to configure the shape of a composite cantilever-beam-like specimen under concentrated loading. The result is then compared with the optical camera-measured shape. The experimental results show that both shape sensing algorithms predict the shape with high accuracy comparable with the optical camera result.Keywords
This publication has 21 references indexed in Scilit:
- RETRACTED: Optical fiber shape sensing of polyimide skin for a flexible morphing wingApplied Optics, 2017
- Shape Sensing Monitoring System Based on Fiber-Optic Strain Measurements: Laboratory TestsExperimental Techniques, 2017
- High-precision real-time 3D shape measurement using a bi-frequency scheme and multi-view systemApplied Optics, 2017
- Real-time 3-D shape measurement with composite phase-shifting fringes and multi-view systemOptics Express, 2016
- Calibration and 3D reconstruction of underwater objects with non-single-view projection model by structured light stereo imagingApplied Optics, 2016
- Compensation of fringe distortion for phase-shifting three-dimensional shape measurement by inverse map estimationApplied Optics, 2016
- Large Scale Applications Using FBG Sensors: Determination of In-Flight Loads and Shape of a Composite Aircraft WingAerospace, 2016
- Fibre Optic Sensors for Structural Health Monitoring of Aircraft Composite Structures: Recent Advances and ApplicationsSensors, 2015
- Three-dimensional imaging with detector arrays on arbitrarily shaped surfacesOptics Letters, 2011
- Structural shape reconstruction with consideration of the reliability of distributed strain data from a Brillouin-scattering-based optical fiber sensorSmart Materials and Structures, 2010