Progress on DCLL Blanket Concept
Authors:
- 1 September 2013
- journal article
- research article
- Published by Taylor & Francis in Fusion Science and Technology
- Vol. 64 (3) , 623-630
Abstract
Under the US Fusion Nuclear Science and Technology Development program, we have selected the Dual Coolant Lead Lithium concept (DCLL) as a reference blanket, which has the potential to be a high performance DEMO blanket design with a projected thermal efficiency of >40%. Reduced activation ferritic/martensitic (RAF/M) steel is used as the structural material. The self-cooled breeder PbLi is circulated for power conversion and for tritium breeding. A SiC-based flow channel insert (FCI) is used as a means for magnetohydrodynamic pressure drop reduction from the circulating liquid PbLi and as a thermal insulator to separate the high-temperature PbLi (~700°C) from the helium-cooled RAF/M steel structure. We are making progress on related R&D needs to address critical Fusion Nuclear Science and Facility (FNSF) and DEMO blanket development issues. While performing the function as the Interface Coordinator for the DCLL blanket concept, we were developing the mechanical design and performing neutronics, s...Keywords
This publication has 21 references indexed in Scilit:
- Neutronics Analysis in Support of the Fusion Development Facility Design EvolutionFusion Science and Technology, 2011
- Three-dimensional nuclear analysis for the US dual coolant lead lithium ITER test blanket moduleFusion Engineering and Design, 2010
- Characterization of key magnetohydrodynamic phenomena in PbLi flows for the US DCLL blanketFusion Engineering and Design, 2008
- One-equation model for quasi-two-dimensional turbulent magnetohydrodynamic flowsPhysics of Fluids, 2007
- Numerical analysis of MHD flow and heat transfer in a poloidal channel of the DCLL blanket with a SiCf/SiC flow channel insertFusion Engineering and Design, 2006
- An overview of dual coolant Pb–17Li breeder first wall and blanket concept development for the US ITER-TBM designFusion Engineering and Design, 2006
- ARIES-AT safety design and analysisFusion Engineering and Design, 2006
- Oxygen measurements in stagnant lead–bismuth eutectic using electrochemical sensorsJournal of Nuclear Materials, 2004
- The EU advanced dual coolant blanket conceptFusion Engineering and Design, 2002
- Blanket system selection for the ARIES-STFusion Engineering and Design, 2000