Digital Background-Calibration Algorithm for “Split ADC” Architecture
Authors:
- 22 July 2008
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 56 (2) , 294-306
Abstract
The ldquosplit ADCrdquo architecture enables continuous digital background calibration by splitting the die area of a single ADC design into two independent halves, each converting the same input signal. The two independent outputs are averaged to produce the ADC output code. The difference of the two outputs provides information for a background-calibration algorithm. Since both ADCs convert the same input, when correctly calibrated, their outputs should be equal, and the difference should be zero. Any nonzero difference provides information to an error-estimation algorithm, which adjusts digital-calibration parameters in an adaptive process similar to a least mean square algorithm. This paper describes the calibration algorithm implemented in the specific realization of a 16-bit 1-MS/s algorithmic cyclic ADC. In addition to correcting ADC linearity, the calibration and estimation algorithms are tolerant of offset error and remove linear scale-factor-error mismatch between the ADC channels. Simulated results are presented confirming self-calibration in approximately 10 000 conversions, which represents an improvement of four orders of magnitude over previous statistically based calibration algorithms.Keywords
This publication has 12 references indexed in Scilit:
- "Split ADC" architecture for deterministic digital background calibration of a 16-bit 1-MS/s ADCIEEE Journal of Solid-State Circuits, 2005
- A split-ADC architecture for deterministic digital background calibration of a 16b 1MS/s ADC2005
- A 1.8 V 14 b 10 MS/s pipelined ADC in 0.18 μm CMOS with 99 dB SFDR2004
- Least Mean Square Adaptive Digital Background Calibration of Pipelined Analog-to-Digital ConvertersIEEE Transactions on Circuits and Systems I: Regular Papers, 2004
- A 12 b 75 MS/s pipelined ADC using open-loop residue amplification2003
- Background calibration techniques for multistage pipelined ADCs with digital redundancyIEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, 2003
- Digital cancellation of D/A converter noise in pipelined A/D convertersIEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, 2000
- A 12-b digital-background-calibrated algorithmic ADC with -90-dB THDIEEE Journal of Solid-State Circuits, 1999
- A 12-b 600 ks/s digitally self-calibrated pipelined algorithmic ADCIEEE Journal of Solid-State Circuits, 1994
- A 15-b 1-Msample/s digitally self-calibrated pipeline ADCIEEE Journal of Solid-State Circuits, 1993