Analytical Blade Row Cooling Model for Innovative Gas Turbine Cycle Evaluations Supported by Semi-Empirical Air-Cooled Blade Data
- 1 July 2004
- journal article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 126 (3) , 498-506
Abstract
With the objective of performing reliable innovative gas turbine cycle calculations, a new procedure aimed at evaluating blade cooling performance is presented. This complete analytical (convective and film) blade cooling modeling provides the coolant mass flow and pressure loss estimation, and is a useful tool in the field of innovative gas turbine cycle analysis, mainly when alternative fluids are considered. In this case, in fact, the conventional semi-empirical data based on the use of air as traditional coolant and working media are no longer suitable. So the analytical approach represents a way of properly investigating alternative cooling methods and fluids. In the presented analysis the effects of internal blade geometry on cooling performance are summarized by the Z parameter, which also highly affects the coolant flow pressure losses. Since existing technology represents a natural starting point for the assessment of Z, the model is able to automatically estimate a proper value relying only on available semi-empirical data which were established for air-cooled gas turbine blades. When alternative fluids are considered, the same estimated value of Z is still maintained for the calculation, with the result of investigating the performance of existing blade technology for novel operational conditions. This represents an example of how the analytical approach, supported by conventional air-cooled blade semi-empirical data, appears as an innovative tool in the analysis of novel gas turbine cycles. In fact, the simulation results for the cooled blade were easily employed on the whole system level (gas turbine).Keywords
This publication has 11 references indexed in Scilit:
- Thermoeconomic analysis of mixed gas–steam cyclesApplied Thermal Engineering, 2002
- Convective Blade Cooling Modelling for the Analysis of Innovative Gas Turbine Cycles2001
- Thermoeconomic Analysis of Gas Turbine Based CyclesJournal of Engineering for Gas Turbines and Power, 2000
- Developing the Next Generation Gas Turbine Systems — A National Partnership2000
- Internal Reforming Solid Oxide Fuel Cell-Gas Turbine Combined Cycles (IRSOFC-GT): Part A—Cell Model and Cycle Thermodynamic AnalysisJournal of Engineering for Gas Turbines and Power, 1999
- Zero Emission MATIANT Cycle1998
- Comparative Evaluation of Combined Cycles and Gas Turbine Systems With Water Injection, Steam Injection, and RecuperationJournal of Engineering for Gas Turbines and Power, 1995
- Gas Turbine Cycles With Solid Oxide Fuel Cells—Part II: A Detailed Study of a Gas Turbine Cycle With an Integrated Internal Reforming Solid Oxide Fuel CellJournal of Energy Resources Technology, 1994
- Rotor blade cooling in high pressure turbinesJournal of Aircraft, 1980
- Mitteilungen des osterreichischen StaatsarchivsThe American Historical Review, 1977