PDMS 2D optical lens integrated with microfluidic channels: principle and characterization
Authors:
- 5 February 2003
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Lab on a Chip
- Vol. 3 (1) , 40-45
Abstract
In this paper, the fabrication and characterization of PDMS 2D-optical lenses are reported. These lenses are designed in order to improve the performance of fluorescent spectroscopy detection performed on a portable chip using optical fibers. The fabrication process of the PDMS layer is first detailed, and the patterns are then checked with a SEM. By comparing various interfacial structures, it is shown that the beam properties of the light coming out from the fiber can be modified depending on the lens curvature radius. As a consequence, for a constant dye concentration, the use of such lenses can increase the intensity of fluorescent response close to the fiber or far from the fiber, compared to the same design with a flat interface. This excitation improvement corresponding to a stronger response from the dye then consequently leads to around three times higher sensitivity of the on-chip detection method for fluorescent spectroscopy.Keywords
This publication has 18 references indexed in Scilit:
- Fabrication of multilayer systems combining microfluidic and microoptical elements for fluorescence detectionJournal of Microelectromechanical Systems, 2001
- Recent developments in detection methods for microfabricated analytical devicesLab on a Chip, 2001
- Monolithic Capillary Electrophoresis Device with Integrated Fluorescence DetectorAnalytical Chemistry, 2001
- Fabrication of microlenses by direct photo-induced crosslinking polymerizationApplied Surface Science, 2000
- Sequential injection sample introduction microfluidic-chip based capillary electrophoresis systemAnalytica Chimica Acta, 1999
- A configuration for guided-wave excitation into a disposable integrated-optic headOptics Communications, 1998
- Fabrication of refractive microlenses in semiconductors by mask shape transfer in reactive ion etchingMicroelectronic Engineering, 1997
- Micromachining a Miniaturized Capillary Electrophoresis-Based Chemical Analysis System on a ChipScience, 1993
- Miniaturized total chemical analysis systems: A novel concept for chemical sensingSensors and Actuators B: Chemical, 1990
- Trends in industrial analytical chemistryTrAC Trends in Analytical Chemistry, 1983