Hollow Out-of-Plane Polymer Microneedles Made by Solvent Casting for Transdermal Drug Delivery
Authors:
- 12 December 2011
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 21 (1) , 44-52
Abstract
Although hollow microneedles have been proposed as an effective and convenient method for transdermal drug delivery, their expensive fabrication techniques to date have prevented their mass fabrication as a viable option. A novel method, based on solvent casting, is presented for inexpensive fabrication of hollow out-of-plane polymer microneedles. Microneedles are formed during a solvent evaporation process, which leaves a polymer layer around pillars in a prefabricated mold. The mold is fabricated using photolithography and can be used for consecutive solvent casting of microneedles. Arrays of microneedles with lengths up to 250 μm have been fabricated from clay-reinforced polyimide. Several mechanical tests were performed on solvent cast solid structures to find the optimum clay percentage in the polyimide that would lead to the highest compressive strength. The fabricated needles were tested for robustness, and it was observed that the needles were capable of withstanding on average compressive loads of up to 0.32 N. The suitability of the microneedles for skin penetration and drug delivery was demonstrated by injection of fluorescent beads into a skin sample.Keywords
This publication has 44 references indexed in Scilit:
- Arrays of solvent cast hollow out-of-plane polymer microneedles for drug delivery2011
- A novel fabrication process for out-of-plane microneedle sheets of biocompatible polymerJournal of Micromechanics and Microengineering, 2007
- Different fabrication methods of out-of-plane polymer hollow needle arrays and their variationsJournal of Micromechanics and Microengineering, 2007
- Biodegradable polymer microneedles: Fabrication, mechanics and transdermal drug deliveryJournal of Controlled Release, 2005
- Hollow Metal Microneedles for Insulin Delivery to Diabetic RatsIEEE Transactions on Biomedical Engineering, 2005
- Fabrication of microneedle array using LIGA and hot embossing processMicrosystem Technologies, 2005
- Microfabricated needles for transdermal delivery of macromolecules and nanoparticles: Fabrication methods and transport studiesProceedings of the National Academy of Sciences, 2003
- Characterization of surface micromachined metallic microneedlesJournal of Microelectromechanical Systems, 2003
- A sampling mechanism employing the phase transition of a gel and its application to a micro analysis system imitating a mosquitoSensors and Actuators B: Chemical, 2001
- Hollow Metallic Micromachined Needle ArraysBiomedical Microdevices, 2000