Preparation, morphology, FTIR and performance properties of foaming particleboard
Authors:
Open Access
- 4 August 2021
- journal article
- research article
- Published by Springer Nature in Journal of Wood Science
- Vol. 67 (1) , 1-12
Abstract
The application of light weight particleboard in furniture industry becomes more inevitable because of the requirement to facilitate transportation and assembly by the customer. Herein, a novel method for the fabrication of foaming particleboard was proposed, which is achieved by adding azodicarbonamide (AC) foaming agent into the formulation that consist of oven-dry poplar (Populus alba) particles (with the moisture content about 4%) and phenol formaldehyde resin (PF resin) (solid content of 48%). In this study, the effects of AC foaming agent and adhesive contents incorporation and its content on mechanical, physical and chemical properties of particleboards were investigated. The results showed that the addition of AC foaming agent played a critical role in properties of particleboard and the optimal particleboard performance was achieved at the particleboard density of 0.6 g/cm3, the PF resin amount of 12%, and the AC foaming agent amount of 1%. Furthermore, the pores appeared on the particle surface were the products of the radical pyrolysis of the foaming agent, which has been proved by the FTIR results and the pores also affect the properties of the particleboards.Keywords
Funding Information
- Major projects of Natural Science Foundation of Jiangsu (18KJA220002)
- china postdoctoral science foundation: special program (2017T100313)
- china postdoctoral science foundation: general program (2016M601821)
This publication has 8 references indexed in Scilit:
- Mechanical properties and dimensional stability of particleboard fabricated from steam pre-treated banana trunk waste particlesJournal of Building Engineering, 2019
- Effects of zinc acetate and cucurbit[6]uril on PP composites: crystallization behavior, foaming performance and mechanical propertiese-Polymers, 2018
- Effect of Particle Pre-Treatment on Properties of Jatropha Fruit Hulls ParticleboardJournal of the Korean Wood Science and Technology, 2018
- Effect of starch addition on properties of citric acid-bonded particleboard made from bambooBioResources, 2017
- Physiomechanical properties of ultra-lightweight foam core particleboard: different core densitiesHolzforschung, 2012
- Manufacture and properties of low-density binderless particleboard from kenaf coreJournal of Wood Science, 2004
- Low density particleboard from wheat straw and corn pithIndustrial Crops and Products, 2002
- Formation of the density profile and its effects on the properties of fiberboardJournal of Wood Science, 2000