A Robust High-$Q$Micromachined RF Inductor for RFIC Applications
Authors:
- 27 June 2005
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 52 (7) , 1489-1496
Abstract
In this paper, a robust micromachined spiral inductor with a cross-shaped sandwich membrane support is proposed and fabricated with fully CMOS compatible post-processes for radio frequency integrated circuit (RFIC) applications. Using the incorporation of a sandwich dielectric membrane (0.7 /spl mu/m SiO/sub 2//0.7 /spl mu/m Si/sub 3/N/sub 4//0.7 /spl mu/m TEOS) to enhance the structure rigidity, the inductor can have better signal stability. In comparison, the new design of a /spl sim/5-nH micromachined inductor can have 45% less inductance variation than the one without the dielectric support while both devices are operated with 10 m/s/sup 2/ acceleration. Meanwhile, using a cross shape instead of blanket membrane can also effectively eliminate the inductance variation induced by the working temperature change (20/spl deg/C to 75/spl deg/C). The measurement results show the robust inductor can have similar electrical performance to the as-fabricated freely suspended inductor, which has five times Q (quality factor) improvement than the inductor without the substrate removal. It is our belief that the new micromachined inductors can have not only high-Q performance but also better signal stability suitable for wide-range RFIC applications.Keywords
This publication has 12 references indexed in Scilit:
- Ultra-wideband for navigation and communications2002
- Microwave characteristics of meander inductors fabricated by 3D self-assembly2002
- Micromachined high-Q inductors in a 0.18-μm copper interconnect low-k dielectric CMOS processIEEE Journal of Solid-State Circuits, 2002
- Phase-noise analysis of MEMS-based circuits and phase shiftersIEEE Transactions on Microwave Theory and Techniques, 2002
- Physics-based closed-form inductance expression for compact modeling of integrated spiral inductorsIEEE Journal of Solid-State Circuits, 2002
- High-performance inductorsIEEE Transactions on Microwave Theory and Techniques, 2001
- A four-step method for de-embedding gigahertz on-wafer CMOS measurementsIEEE Transactions on Electron Devices, 2000
- On-chip spiral inductors suspended over deep copper-lined cavitiesIEEE Transactions on Microwave Theory and Techniques, 2000
- On-chip spiral inductors with patterned ground shields for Si-based RF ICsIEEE Journal of Solid-State Circuits, 1998
- A fully integrated CMOS DCS-1800 frequency synthesizerIEEE Journal of Solid-State Circuits, 1998