Thermal Resistance Variations of Fly Ash Geopolymers: Foaming Responses
Open Access
- 27 March 2017
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 7 (1) , srep45355
Abstract
This paper presents a comparative study of the characteristic of unfoamed and foamed geopolymers after exposure to elevated temperatures (200–800 °C). Unfoamed geopolymers were produced with Class F fly ash and sodium hydroxide and liquid sodium silicate. Porous geopolymers were prepared by foaming with hydrogen peroxide. Unfoamed geopolymers possessed excellent strength of 44.2 MPa and degraded 34% to 15 MPa in foamed geopolymers. The strength of unfoamed geopolymers decreased to 5 MPa with increasing temperature up to 800 °C. Foamed geopolymers behaved differently whereby they deteriorated to 3 MPa at 400 °C and increased up to 11 MPa at 800 °C. Even so, the geopolymers could withstand high temperature without any disintegration and spalling up to 800 °C. The formation of crystalline phases at higher temperature was observed deteriorating the strength of unfoamed geopolymers but enhance the strength of foamed geopolymers. In comparison, foamed geopolymer had better thermal resistance than unfoamed geopolymers as pores provide rooms to counteract the internal damage.Keywords
This publication has 47 references indexed in Scilit:
- Characterization of geopolymer fly-ash based foams obtained with the addition of Al powder or H2O2 as foaming agentsMaterials Characterization, 2016
- A comparison between different foaming methods for the synthesis of light weight geopolymersCeramics International, 2014
- Geopolymer foam concrete: An emerging material for sustainable constructionConstruction and Building Materials, 2014
- Micromechanical characterization of metakaolin-based geopolymersConstruction and Building Materials, 2013
- Kaolin-based geopolymers with various NaOH concentrationsInternational Journal of Minerals, Metallurgy and Materials, 2013
- Synthesis of volcanic ash-based geopolymer mortars by fusion method: Effects of adding metakaolin to fused volcanic ashCeramics International, 2013
- Effect of Composition on Structure and Mechanical Properties of Metakaolin Based PSS-GeopolymerInternational Journal of Material Sciences, 2013
- Effect of pumice and fly ash incorporation on high temperature resistance of cement based mortarsCement and Concrete Research, 2007
- Physical evolution of Na-geopolymer derived from metakaolin up to 1000 °CJournal of Materials Science, 2007
- Mechanism of geopolymerization and factors influencing its development: a reviewJournal of Materials Science, 2007