Design of 10Cr martensitic steels for improved creep resistance in power plant applications
Authors:
- 1 July 2013
- journal article
- Published by SAGE Publications in Materials Science and Technology
- Vol. 29 (7) , 767-774
Abstract
The drive to increase the efficiency of fossil fired power generation to reduce CO2 emissions and to conserve energy resources has led Tata Steel to design new 10Cr martensitic compositions for use at temperatures of 620°C and above with creep properties superior to steel 92 (9Cr, 0·5Mo, and 2W), which is the best currently available steel of this type. In the new alloys, the chromium content was set at 10 to ensure the required oxidation resistance. The long term creep performance of steels with this level of chromium has been limited by the precipitation of Z phase nitrogen rich particles. These form at the expense of vanadium rich MN precipitates that are vital for long term creep strength. Compositions have been designed with the aim of suppressing or delaying Z phase formation. The principles underlying the new steel chemistries are discussed, and a detailed explanation is given of the role of heat treatment in optimising creep rupture strength at temperatures in excess of 600°C. The new steel compositions are based on published work supplemented by thermodynamic calculations to optimise the heat treatment cycle, to produce a fully martensitic microstructure and to maximise the stable nanoprecipitates that are essential to maximise creep rupture life.Keywords
This publication has 4 references indexed in Scilit:
- Effect of tempering temperature on Z-phase formation and creep strength in 9Cr–1Mo–V–Nb–N steelMaterials Science and Engineering: A, 2008
- Influence of thermal history on precipitation of hardening phases in tempered martensite 10%Cr-steel X12CrMoWVNbN 10-1-1Materials Science and Engineering: A, 2003
- Effect of Heat Treatment on Precipitation Kinetics in High-Cr Ferritic Steels.ISIJ International, 2002
- Creep Deformation and the Corresponding Microstructural Evolution in High-Cr Ferritic SteelsISIJ International, 2001