Modification, Degradation and Evaluation of a Few Organic Coatings for Some Marine Applications
Open Access
- 21 December 2020
- journal article
- review article
- Published by MDPI AG in Corrosion and Materials Degradation
- Vol. 1 (3) , 408-442
Abstract
Organic coatings for marine applications must have great corrosion protection and antifouling performance. This review presents an overview of recent investigations into coating microstructure, corrosion protection performance, antifouling behavior, and evaluation methods, particularly the substrate effect and environmental influence on coating protectiveness, aiming to improve operational practice in the coating industry. The review indicates that the presence of defects in an organic coating is the root cause of the corrosion damage of the coating. The protection performance of a coating system can be enhanced by proper treatment of the substrate and physical modification of the coating. Environmental factors may synergistically accelerate the coating degradation. The long-term protection performance of a coating system is extremely difficult to predict without coating defect information. Non-fouling coating and self-repairing coatings may be promising antifouling approaches. Based on the review, some important research topics are suggested, such as the exploration of rapid evaluation methods, the development of long-term cost-effective antifouling coatings in real marine environments.Keywords
Funding Information
- National Key Research and Development Program of China (2017YFB0702100)
- National Natural Science Foundation of China (51731008)
This publication has 300 references indexed in Scilit:
- Corrosion inhibition performance of polypyrrole Al flake composite coatings for Al alloysCorrosion Science, 2013
- Entrapment of Subtilisin in Ceramic Sol–Gel Coating for Antifouling ApplicationsACS Applied Materials & Interfaces, 2012
- Dual Action Antimicrobials: Nitric Oxide Release from Quaternary Ammonium-Functionalized Silica NanoparticlesBiomacromolecules, 2012
- Photooxidation of polymers: Relating material properties to chemical changesPolymer Degradation and Stability, 2012
- Durable, Self‐Healing Superhydrophobic and Superoleophobic Surfaces from Fluorinated‐Decyl Polyhedral Oligomeric Silsesquioxane and Hydrolyzed Fluorinated Alkyl SilaneAngewandte Chemie International Edition, 2011
- Surface treatment of stainless steel to improve coating strength of ZrO2 coated stainless steel needleSurface Engineering, 2011
- Influence of zincate pretreatment on adhesion strength of a copper electroplating layer on AZ91 D magnesium alloySurface and Coatings Technology, 2011
- Water swelling behaviors of silica-reinforced NBR composites in deionized water and salt solutionJournal of Industrial and Engineering Chemistry, 2010
- Effect of UV radiation on the semi-interpenetrating polymer networks based on polyurethane and epoxy maleate of bisphenol AJournal of Photochemistry and Photobiology A: Chemistry, 2005
- Rapid assessment of food/package interactions by electrochemical impedance spectroscopy (EIS)Food Additives & Contaminants, 1997