Black layers on historical architecture
Authors:
- 7 October 2008
- journal article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 16 (2) , 218-226
Abstract
The external surface of any building in urban polluted environment is unavoidably destined to be covered with layers that assume a grey to black colour and are generally called ‘black crusts’. These, according to standard protocols and glossary, are deteriorated surface layers of stone material; they can have variable thickness, are hard and fragile and can detach spontaneously from the substrate, which, in general, is quite decayed. Plain visual examination may lead to consider ‘black crusts’ all similar, whilst only a careful diagnostic investigation can distinguish ‘black crusts’ and the consequences of their formation on stone substrates. In this paper, various black layers on marble are studied and compared and the morphological and compositional characteristics discussed according to the related mechanisms of formation. Differences between old (hundred years) and recent crusts (30 years) are investigated and pointed out. Samples of black crusts collected from the Milan Cathedral façade (Candoglia Marble) have been studied and compared with the careful and synergic employ of traditional techniques: optical (transmission and reflected VIS light) and electron microscopy, X-ray spectrometry and micro-Fourier transform infrared spectroscopy. Visual examination of loose fragments does not allow to point out outstanding differences amongst the various samples; black layers have similar main mineral components, gypsum and airborne particles, with different spatial distribution. The microscopic studies allowed to point out the porosity differences, the gypsum crystallisation habit, different amount of embedded particles, level and progress of marble decay. The observations lead to define three main types of black crusts: black crust deriving from marble sulphation, compact deposit and encrustation due to exogenic materials deposition. Black crusts show evidence of sulphation in progress, without a clear continuity solution between crust and marble; the lack of separation is particularly evident in ‘recent’ crust, where the sulphation process is more active. Black compact deposits show a higher porosity than black crusts because gypsum is not coming from the chemical corrosion of the substrate but from outside; actually, in the former case, the substrate is sound. Encrustations show a highly regular crystal organisation of gypsum (close packed tabular crystals) that cannot be traced back to casual atmospheric deposit or to corrosion of the substrate but rather to the crystallisation of a solution coming from an external source. Also in this case, the marble is sound; evidence of the effect of some protection treatment is pointed out. In spite of the apparent similarity of the examined samples, analytical results have evidenced three main types of black crusts: black crust with decayed substrate, compact deposit and black encrustation showing a sound substrate underneath. Experimental evidence of calcite grains sulphation in progress, taking place according to a model recently proposed, has been observed. Sulphation process is prevented where particular conservation treatments had been applied in the past. New experimental studies can be focussed to understand the specific conditions (measurements of micro-climatic and thermodynamic parameters) and mechanisms for black crusts formation in situ. The problem of the kinetic of the sulphation process of marble, the assessment of black layers formation in the case of different carbonate stone materials and the study of acid attack in presence of surface protecting layers deserve further investigation.Keywords
This publication has 18 references indexed in Scilit:
- Soiling of building stones in urban environmentsBuilding and Environment, 2003
- Airborne particulate matter around the Cathedral of Burgos (Castilla y León, Spain)Atmospheric Environment, 2001
- Rate of formation of black crusts on marble. A case studyJournal of Cultural Heritage, 2000
- Embryonic sulphated black crusts on carbonate rocks in atmospheric simulation chamber and in the field: role of carbonaceous fly-ashAtmospheric Environment, 1999
- Effect of airborne particle on SO2–calcite reactionApplied Surface Science, 1999
- Studies of Patinas and Decay Mechanisms Leading to the Restoration of Santa Maria de Montblanc (Catalonia, Spain)Studies in Conservation, 1996
- Sulphur and nitrogen particulate pollutant deposition on to building surfacesScience of The Total Environment, 1995
- Model study of the first steps in the deterioration of calcareous stone I. Initial surface sulphite formation on calciteApplied Surface Science, 1994
- The role of fly-ash particulate material and oxide catalysts in stone degradationAtmospheric Environment. Part A. General Topics, 1992
- Origin and growth mechanisms of the sulfated crusts on urban limestoneWater, Air, & Soil Pollution, 1983