Continuous Cell Debris Filtration Using A Magnetically Stabilized Fluidized Bed
Authors:
- 1 September 1989
- journal article
- research article
- Published by Wiley in Biotechnology Progress
- Vol. 5 (3) , 98-104
Abstract
The magnetically stabilized fluidized bed (MSFB) is capable, unlike most column operations, of handling streams with suspended particles. The MSFB has the contacting properties of a packed bed and the fluidity of a fluidized bed. When cell debris is fed into the column, either filtration or passage of the debris can be obtained depending on the bed height, solids velocity, pH, and liquid composition. Removal rates from as high as 99% to as low as 5% have been observed. The controlling mechanism of filtration appears to be an electrostatic adsorption of the debris onto the surface of the support. Debris/debris adhesion also affects filtration.Keywords
This publication has 18 references indexed in Scilit:
- STRUCTURAL STUDIES OF A LIQUID-FLUIDIZED MAGNETICALLY STABILIZED BEDChemical Engineering Communications, 1988
- Affinity Separations in Magnetically Stabilized Fluidized Beds: Synthesis and Performance of Packing MaterialsSeparation Science and Technology, 1987
- Experimental investigation of aerosol filtration in magnetically stabilized fluidized bed filtersChemical Engineering Science, 1986
- Continuous Affinity Chromatography Using a Magnetically Stabilized Fluidized BedBiotechnology Progress, 1985
- Particle collection in magnetically stabilized fluidized filtersAIChE Journal, 1985
- Processing Cell Lysate with Tangential Flow Filtration1985
- Magnetically stabilized fluidized beds with continuous solids throughputPowder Technology, 1984
- Investigation of the parameters affecting the separation of bacterial enzymes from cell debris by tangential flow filtrationEnzyme and Microbial Technology, 1984
- Protein Purification1982
- Characteristics of mechanically disrupted bakers' yeast in relation to its separation in industrial centrifugesBiotechnology and Bioengineering, 1981