Dynamic performance of over-constrained planar mechanisms with multiple revolute clearance joints
Authors:
- 30 October 2017
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 232 (19) , 3524-3537
Abstract
The clearances of joints in a rigid multibody system may deteriorate the motion accuracy and even cause vibrations, noise and fatigue failure of structures. In over-constrained mechanisms, the number of degree-of-freedoms is more than that of independent coordinates which leads to numerical challenges in solving the underdetermined force equilibrium equations. A comprehensive study on the dynamic model and the performance of an over-constrained planar parallelogram mechanism with multiple clearance joints is presented in this paper. Since a common angular coordinate exists in the clearance joint associated with the redundant constraint, the degree-of-freedoms are revised by eliminating the number of redundant constraints. In planar analysis, the location of mass center and the orientation of the body reference with respect to the inertial frame are selected as the generalized coordinates of the components. Clearance joints are equivalent as the spring-damper elements and the contact forces are introduced into the dynamic equations by force constraints. The developed computational algorithm is implemented by MATLAB and may analyze the dynamic performance of this mechanism due to the elimination of kinematic constraints and the nonlinear contact-impact behavior in the clearance joints. Meanwhile, an orthogonal experimental design based on a quantitative analysis method demonstrates that the clearance size and the location of clearance joints affect the kinematic accuracy and counterbalance moment of the mechanism.Keywords
This publication has 33 references indexed in Scilit:
- Nonlinear vibration analysis of mechanical systems with multiple joint clearances using the method of multiple scalesMechanism and Machine Theory, 2016
- Wear Analysis of Two Revolute Joints With Clearance in Multibody SystemsJournal of Computational and Nonlinear Dynamics, 2016
- Dynamic analysis of mechanical systems with planar revolute joints with clearanceMechanism and Machine Theory, 2015
- Experimental comparison of five friction models on the same test-bed of the micro stick-slip motion systemMechanical Sciences, 2015
- A comparative study of the viscoelastic constitutive models for frictionless contact interfaces in solidsMechanism and Machine Theory, 2015
- Compliant contact force models in multibody dynamics: Evolution of the Hertz contact theoryMechanism and Machine Theory, 2012
- On the continuous contact force models for soft materials in multibody dynamicsMultibody System Dynamics, 2010
- A Regularized Contact Model with Asymmetric Damping and Dwell-Time Dependent FrictionMultibody System Dynamics, 2004
- A Contact Force Model With Hysteresis Damping for Impact Analysis of Multibody SystemsJournal of Mechanical Design, 1990
- Mechanical Joints With Clearance: A Three-Mode ModelJournal of Engineering for Industry, 1976