Hybrid bio-based composites from blends of epoxy and soybean oil resins reinforced with jute woven fabrics
Open Access
- 1 January 2020
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 7 (1) , 015335
Abstract
In our world, where environmental factors are taken into consideration more and more, the interest in biomaterials leaves its place to the need and this leads the researchers to search for new materials. The aim of this study is to produce an environmentally friendly, sustainable material with the use of a plant oil-based bio-resin (acrylated epoxidized soybean oil). In this context, bio-composites containing different proportions (from 0 to 100 wt%, in 10% increments) of acrylated epoxidized soybean oil (AESO) and epoxy resin are reinforced with four-ply jute woven fabric and produced by the vacuum infusion method. The bio-composites produced within the scope of the study analyzed physically (fiber weight ratio), mechanically (tensile strength, flexural strength, drop-weight impact resistance, and Charpy impact strength), instrumentally (differential scanning calorimetry and Fourier-transform infrared spectroscopy) and morphologically (scanning electron microscopy). According to the results, the tensile and flexural strength values of the composites containing more than 30 wt% AESO resin decrease due to the ductility of the structure; subsequently, composites with AESO content above 50 wt% are found to exhibit superior impact resistance. Composites with pure AESO resin absorb 7 J energy which is almost 3 times higher than pure epoxy composites. The maximum tensile strength (63 MPa) of composites are achieved for 30 wt% AESO content indicating the newly formed hydrogen bonding leading to enhanced fiber-matrix interface. The bio-composites designed and produced in the project have been a promising alternative for various end-use areas, from construction elements to the automotive sector and sports equipment, where human health and environmental elements are considered.Keywords
Funding Information
- Istanbul Teknik Üniversitesi (BAP 40598)
This publication has 43 references indexed in Scilit:
- Mechanical properties of woven jute–glass hybrid-reinforced epoxy compositeJournal of Composite Materials, 2013
- Hybrid composite laminates reinforced with glass/carbon woven fabrics for lightweight load bearing structuresMaterials & Design (1980-2015), 2012
- Hybrid composites made of carbon and glass woven fabrics under quasi-static loadingMaterials & Design (1980-2015), 2011
- Hybrid thermosets from vinyl ester resin and acrylated epoxidized soybean oil (AESO)Express Polymer Letters, 2011
- Synthesis of reactive soybean oils for use as a biobased thermoset resins in structural natural fiber compositesJournal of Applied Polymer Science, 2009
- Tensile, flexural and interlaminar shear properties of woven jute and jute-glass fabric reinforced polyester compositesJournal of Materials Processing Technology, 2008
- Novel biobased resins from blends of functionalized soybean oil and unsaturated polyester resinJournal of Polymer Science Part B: Polymer Physics, 2007
- Automotive Materials: Technology Trends and Challenges in the 21st CenturyMRS Bulletin, 2006
- Physical and mechanical characterization of jute fabric compositesJournal of Applied Polymer Science, 2005
- Next step for automotive materialsMaterials Today, 2003