Mechanical Performance and Compressive Behaviour of Plastic Waste–Based Brick under Horizontal and Vertical Loading Orientations
Authors:
- Nicco PlamoniaNPNicco Plamonia
- Agung RiyadiARAgung Riyadi
- Sarjono SarjonoSSSarjono Sarjono
- Hadi SupratiktaHSHadi Supratikta
- Gani SoehadiGSGani Soehadi
- Maria Holly HerawatiMHMaria Holly Herawati
- Sutrisno HutagalungSHSutrisno Hutagalung
- Budi KurniawanBKBudi Kurniawan
- Muhamad KomarudinMKMuhamad Komarudin
- Ignatius SubagjoISIgnatius Subagjo
- Etty SisdianaESEtty Sisdiana
Open Access
- 13 July 2026
- journal article
- Published by Cerebration Science Publishing Co., Limited in Future Cities and Environment
- Vol. 12
Abstract
Plastic waste–based bricks (PW-Bricks) offer a promising pathway for plastic waste valorisation in the construction sector; however, their mechanical performance is commonly evaluated using a single compressive strength metric that does not reflect actual masonry loading conditions. This study investigates the compressive behaviour of PW-Bricks under horizontal and vertical loading and proposes an orientation-sensitive evaluation framework for mix optimization. PW-Bricks incorporating 20–50% plastic waste were fabricated alongside conventional cement–sand bricks as control specimens and tested at curing ages of 3, 7, and 10 days following ASTM C109/C109M-21. The results demonstrate a pronounced orientation-dependent response. Under horizontal loading, compressive strength increased with plastic waste content and curing age, reaching 30.15 MPa for PW-Bricks containing 50% plastic waste at 10 days, compared with 22.74 MPa for conventional bricks. In contrast, under vertical loading, PW-Bricks exhibited relatively low and nearly constant compressive strengths ranging from 1.08 to 1.22 MPa, whereas conventional bricks achieved 2.48 MPa at 10 days. To evaluate this trade-off, normalized horizontal and vertical strength indices were integrated into a composite performance index balancing enhanced horizontal resistance with minimum vertical stability requirements. Based on this evaluation, PW-Bricks containing 40% plastic waste were identified as the optimal mix, providing the most favourable balance between mechanical performance, material homogeneity, and sustainability. The proposed framework offers a transferable methodology for evaluating heterogeneous waste-based masonry materials and supports application-oriented mix design for non-load-bearing and semi-structural masonry systems.Keywords
This publication has 60 references indexed in Scilit:
- Materials Efficiency in Construction: Development, Selection, and Life Cycle Assessment2025
- Multifaceted Behavior and Functional Versatility of Ferritic Stainless Steels, Part I: Applications and Processing, a ReviewSteel Research International, 2025
- Plastic Waste Management in Developing Countries: Challenges, Strategies, and Opportunities2025
- Plastic Pollution in South and Southeast Asia: Challenges and Sustainable SolutionsLand Degradation & Development, 2025
- Properties of recycled polypropylene/quarry dust compositesJournal of Material Cycles and Waste Management, 2024
- Absorption Tests of Binary and Ternary Mortar Mixtures and Their Relationship with Compressive Strength2023
- Performance of polymer bricks produced with plastic wasteInnovative Infrastructure Solutions, 2022
- Effect of mix proportion on the strength and durability of plastic and sand composite for construction applicationsInnovative Infrastructure Solutions, 2022
- Computations on historic masonry structuresProgress in Structural Engineering and Materials, 2002
- Structural Masonry1998