Effect of Pro-Ecological Cooling and Lubrication Methods on the Sharpening Process of Planar Blades Used in Food Processing
Open Access
Abstract
This work presents the results of an experimental study of the sharpening of planar technical blades used in the fish processing industry. Sharpening was carried out in the grinding process using several environmentally friendly methods of cooling and lubricating the machining zone (MQL method, CAG nozzle, hybrid method that is a combination of MQL and CAG methods, as well as WET flooding method as reference). The purpose of the research was to determine the possibility of reducing the negative environmental impact of the sharpening process of technical blades by minimizing the expenditure of coolant. The application of the MQL method and the hybrid MQL + CAG method provided a very good realization of the lubricating function so that the share of friction of dulled cutting vertices against the workpiece surface is reduced, which manifests itself in the reduction of the grinding force and the correlated grinding power. In the case of grinding under cooled compressed air delivery conditions, the average cutting force was as much as 91.6% higher (F = 22.63 N) compared to the result obtained for the most favorable flooding method, demonstrating the insufficient quality of the blade shaped under such conditions. A comprehensive comparison of test results on grinding power gain, cutting force and surface texture suggests that the most favorable sharpening results were obtained using the environmentally friendly MQL method of cooling and lubricating the grinding zone.Keywords
This publication has 42 references indexed in Scilit:
- Influence of oil mist parameters on minimum quantity lubrication – MQL grinding processInternational Journal of Machine Tools and Manufacture, 2010
- On the sharpness of straight edge blades in cutting soft solids: Part II – Analysis of blade geometryEngineering Fracture Mechanics, 2010
- An experimental investigation of the effects of workpiece and grinding parameters on minimum quantity lubrication—MQL grindingInternational Journal of Machine Tools and Manufacture, 2009
- On the sharpness of straight edge blades in cutting soft solids: Part I – indentation experimentsEngineering Fracture Mechanics, 2007
- Analysis of surface integrity for minimum quantity lubricant—MQL in grindingInternational Journal of Machine Tools and Manufacture, 2007
- Study on the behavior of the minimum quantity lubricant - MQL technique under different lubricating and cooling conditions when grinding ABNT 4340 steelJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2005
- An assessment of the applicability of cold air and oil mist in surface grindingJournal of Materials Processing Technology, 2003
- The cooling effects of compressed cold air in cylindrical grinding with alumina and CBN wheelsJournal of Materials Processing Technology, 2002
- The effects of cryogenic cooling on chips and cutting forces in turning AISI 1040 and AISI 4320 steelsProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2002
- MODELING TOOL STRESSES AND TEMPERATURE EVALUATION IN TURNING USING FINITE ELEMENT METHODMachining Science and Technology, 1998