Fabrication of advanced La-incorporated Hf-silicate gate dielectrics using physical-vapor-deposition-based in situ method and its effective work function modulation of metal/high-k stacks
- 1 February 2010
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 107 (3) , 034104
Abstract
Lanthanum (La) incorporation into Hf-silicate high-permittivity (high- ) gate dielectrics was conducted using a physical-vapor-deposition (PVD)-based in situ method. PVD-grown metal Hf, La, and Hf–La alloys on base oxides received in situ annealing to form high-quality HfLaSiO dielectrics, and subsequent deposition of metal gate electrodes was carried out to fabricate advanced metal/high- gate stacks without breaking vacuum. The in situ method was found to precisely control La content and its depth profile and to tune the effective work function of metal/high- stacks. Remarkable leakage current reduction of almost seven orders of magnitude compared with conventional poly- stacks and excellent interface properties comparable to an ideal interface were also achieved at an equivalent oxide thickness of around 1.0 nm. Our x-ray photoelectron spectroscopy analysis revealed that, as previously suggested, effective work function modulation due to La incorporation is attributed to the interface dipole (or localized sheet charge) at the bottom high- interface, which is crucially dependent on the La content at the interface. Moreover, it was found that high-temperature annealing causing interface oxide growth leads to redistribution of La atoms and forms the uppermost La-silicate layer at the metal/high- interface by releasing the dipole moment at the bottom high- interface. Based on these physical and electrical characterizations, the advantages and process guidelines for La-incorporated dielectrics were discussed in detail.
Keywords
This publication has 19 references indexed in Scilit:
- Engineering High Dielectric Constant Materials for Band-Edge CMOS ApplicationsECS Transactions, 2008
- La Al O 3 gate dielectric with ultrathin equivalent oxide thickness and ultralow leakage current directly deposited on Si substrateJournal of Applied Physics, 2008
- Enhanced Performance of Gate-First p-Channel Metal–Insulator–Semiconductor Field-Effect Transistors with Polycrystalline Silicon/TiN/HfSiON Stacks Fabricated by Physical Vapor Deposition Based In situ MethodJapanese Journal of Applied Physics, 2007
- Suppression of oxygen vacancy formation in Hf-based high-k dielectrics by lanthanum incorporationApplied Physics Letters, 2007
- Impact of Physical Vapor Deposition-Based In situ Fabrication Method on Metal/High-k Gate StacksJapanese Journal of Applied Physics, 2007
- Symmetrical threshold voltage in complementary metal-oxide-semiconductor field-effect transistors with HfAlOx(N) achieved by adjusting Hf∕Al compositional ratioJournal of Applied Physics, 2006
- High dielectric constant gate oxides for metal oxide Si transistorsReports on Progress in Physics, 2005
- Analytical quantum mechanical model for accumulation capacitance of MOS structuresIEEE Electron Device Letters, 2002
- Atomic beam deposition of lanthanum- and yttrium-based oxide thin films for gate dielectricsApplied Physics Letters, 2000
- Electrical properties of hafnium silicate gate dielectrics deposited directly on siliconApplied Physics Letters, 1999