Evaluation of Concrete Abrasion Using Traditional and High-Speed Underwater Methods
Authors:
- 1 April 2023
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 35 (4) , 04023030
Abstract
With the increasing height of new dams, the number of high-water-head and high-flow spillway buildings is gradually increasing, and concretes are required to have better abrasion resistance. Current standards offer a method for evaluating the abrasion resistance of concrete, but when evaluating the abrasion resistance of high-performance concretes, it is necessary to extend the test time to more than 120 h. In this study, an improved way of the current code-specified underwater method was proposed to shorten the testing time, called the high-speed underwater method (HSUM), and the test results of the two methods were evaluated using three-dimensional (3D) laser-scanning technology. It was found that the abrasion efficiency of the HSUM was about twice as much as that of the code-specified method. HSUM resulted in a significant acceleration of the concrete coarse aggregate abrasion process. The average abrasion depth of concrete was between 0 and 6.5 mm (HSUM after 15 h and code method after 30 h), and the abrasion mainly occurred on the surface of slurry, when the abrasion resistance of concrete was obviously affected by the strength and volume of slurry. When the average abrasion depth of concrete exceeded 6.5 mm, it entered the aggregate abrasion stage, and its abrasion resistance was influenced by the aggregate hardness and aggregate content, and the correlation with the slurry strength decreases. The surface roughness parameters and of HSUM concrete increase significantly compared with the code method. HSUM allows for a reduction in experimental time and high performance in evaluating the abrasion resistance of high-performance concretes or concretes with special aggregates (high-strength granite aggregates and cast stone aggregates).
Keywords
This publication has 32 references indexed in Scilit:
- Experimental study of the effect of water-cement ratio on compressive strength, abrasion resistance, porosity and permeability of Nano silica concreteFracture and Structural Integrity, 2018
- Effect of silica fume and PVA fiber on the abrasion resistance and volume stability of concreteComposites Part B: Engineering, 2017
- Effects of fluidal fly ash on abrasion resistance of underwater repair concreteWear, 2017
- Three-Dimensional Characterization of Concrete’s Abrasion Resistance Using Laser ProfilometryStrojniški vestnik - Journal of Mechanical Engineering, 2015
- Abrasion resistance of concrete containing marginal aggregatesConstruction and Building Materials, 2014
- Study on the Influence of Form Factor of Abrasion Particles on ConcreteAdvanced Materials Research, 2011
- Mathematical model of abrasive wear of high performance concreteWear, 2008
- Influence of class F fly ash on the abrasion–erosion resistance of high-strength concreteConstruction and Building Materials, 2007
- Abrasion erosion of concrete by water-borne sandCement and Concrete Research, 2006
- Testing Abrasion Resistance of High-Strength ConcreteCement, Concrete and Aggregates, 2001