The effects of swirl number on the combustion characteristics in an internally-staged combustor
Authors:
- 30 August 2021
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 236 (6) , 3230-3244
Abstract
The three-dimensional turbulent swirling flame in an internally-staged combustor is numerically investigated. Four cases over a range of swirl intensities are explored by the Flamelet Generated Manifold model in this paper. Special attention is paid to analyzing the variation of the flow field, temperature, major species concentrations and emissions. The results clearly show the effects of swirl number on the size of the center recirculation zone, fuel distribution and combustion characteristics. When the third premixed stage swirl number increases from 0.6 to 1.2, the axial length of the center recirculation zone decreases by 3.7%, while the radial length increases by 6.9%. The characteristics of the flow field play an important role in the spatial distribution of the fuel, which further affects the temperature distribution in the combustor. The backflow effect is enhanced, resulting in a greater concentration of fuel at the outlet of the swirler. After the maximum temperature is reached at the exit position of the pilot stage, the temperature decreases compared to the peak temperature downstream as the proportion of premixed combustion mode increases. This creates a high concentration region of OH at the outlet of the pilot stage injector and the heat release region is squeezed upstream. At the same time, the volume of the high-temperature region downstream of the pilot stage is reduced. In addition, as the swirl number of the third premixed stage increases from 0.6 to 1.2, the emissions of NO and CO decrease by 28.7% and 75%, respectively.Keywords
Funding Information
- National Science and Technology Major Project (2017-III-0006-0031)
- Fundamental Research Funds for the Central Universities (3072019CFJ0307)
This publication has 33 references indexed in Scilit:
- Combustion instability of a lean premixed prevaporized gas turbine combustor studied using phase-averaged PIVCombustion and Flame, 2014
- A numerical approach to reduction of NOx emission from swirl premix burner in a gas turbine combustorApplied Thermal Engineering, 2013
- Large Eddy Simulation of a Polydisperse Ethanol Spray FlameFlow, Turbulence and Combustion, 2013
- Dynamics and stability of lean-premixed swirl-stabilized combustionProgress in Energy and Combustion Science, 2009
- A Premixed Flamelet−PDF Model for Biomass Combustion in a Grate FurnaceEnergy & Fuels, 2008
- Effect of pressure and fuel–air unmixedness on NOx emissions from industrial gas turbine burnersCombustion and Flame, 2007
- Detailed characterization of the dynamics of thermoacoustic pulsations in a lean premixed swirl flameCombustion and Flame, 2007
- A CFD study on thermo-acoustic instability of methane/air flames in gas turbine combustorJournal of Mechanical Science and Technology, 2005
- Combustion2004
- Formation of nitric oxide in premixed hydrocarbon flamesSymposium (International) on Combustion, 1971