A 23–46-GHz Fully Planar 8 × 8 Multistandard 5G Phased Array With OFDM 400-MHz 64-QAM Waveforms at 40–44-dBm EIRP
- 21 May 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (11) , 6739-6748
Abstract
This article presents a 23–46-GHz, $8\ttimes 8$ single-polarized wideband bow-tie phased array designed to support multistandard fifth-generation (5G) communications. The array is built by integrating SiGe BiCMOS Tx/Rx beamformer chips with stacked differential bow-tie antennas on a single printed circuit board (PCB). The array is capable of $\pm$ 55 $^{\circ}$ and $\pm$ 35 $^{\circ}$ scanning in the azimuth plane and the elevation plane and achieves an effective isotropic radiated power (EIRP) of 42–48 dBm at P1 dB at 23–46 GHz. In the Rx mode, the array yields a peak G/T of $-$ 10 and $-$ 14 dB/K from 23 to 46 GHz. Measurements on 16/64/256-QAM modulated waveforms show $<$ 5% EVM and 42–45-dBm average EIRP with a peak data rate of 3.2 Gb/s. The array also transmits 5G OFDM 400-MHz waveforms with a PAPR of 11 dB at an EIRP of 40–44 dBm and 3.5% EVM, making it ideal for use as small base stations. To the authors’ knowledge, this work achieves the widest bandwidth among the reported planar phased arrays with application areas to multistandard 5G systems.Keywords
Funding Information
- Samsung LSI and University of California at San Diego (UCSD) Center for Wireless Communications
This publication has 25 references indexed in Scilit:
- A Quad-Band RX Phased-Array Receive Beamformer with Two Simultaneous Beams, Polarization Diversity, and 2.1–2.3 dB NF for C/X/Ku/Ka-Band SATCOM2023
- A Multi-Band 16–52-GHz Transmit Phased Array Employing 4 × 1 Beamforming IC With 14–15.4-dBm P sat for 5G NR FR2 OperationIEEE Journal of Solid-State Circuits, 2021
- Dual-Band, Two-Layer Millimeter-Wave Transceiver for Hybrid MIMO SystemsIEEE Journal of Solid-State Circuits, 2021
- A 28-GHz CMOS Phased-Array Beamformer Utilizing Neutralized Bi-Directional Technique Supporting Dual-Polarized MIMO for 5G NRIEEE Journal of Solid-State Circuits, 2020
- A 39-GHz 64-Element Phased-Array Transceiver With Built-In Phase and Amplitude Calibrations for Large-Array 5G NR in 65-nm CMOSIEEE Journal of Solid-State Circuits, 2020
- A 37-40 GHz Phased Array Front-end with Dual Polarization for 5G MIMO Beamforming Applications2019
- A 64-Element 28-GHz Phased-Array Transceiver With 52-dBm EIRP and 8–12-Gb/s 5G Link at 300 Meters Without Any CalibrationIEEE Transactions on Microwave Theory and Techniques, 2018
- 63.5–65.5-GHz Transmit/Receive Phased-Array Communication Link With 0.5–2 Gb/s at 100–800 m and ± 50° Scan AnglesIEEE Transactions on Microwave Theory and Techniques, 2018
- 60-GHz 64- and 256-Elements Wafer-Scale Phased-Array Transmitters Using Full-Reticle and Subreticle Stitching TechniquesIEEE Transactions on Microwave Theory and Techniques, 2016
- Antenna Miniaturization and Bandwidth Enhancement Using a Reactive Impedance SubstrateIEEE Transactions on Antennas and Propagation, 2004