Adsorption of Orange II Onto Zn2Al–Layered Double Hydroxide Prepared From Zinc Ash
Open Access
- 30 November 2020
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 8
Abstract
The dye industry is one of the largest water consuming industries, and at the same time generates large quantities of wastewaters. The resulting wastewaters require proper treatment before discharge, because the dye contents have a negative effect on the water body and organisms present in it. The most efficient treatment method for water containing dyes is represented by adsorption processes. The challenge with these adsorption processes is to develop new, efficient, viable, and economic adsorbent materials. Therefore, in the present paper, the performance of Zn2Al-layered double hydroxide, prepared from an industrial waste (zinc ash) as a zinc source, was investigated in the Orange II dye adsorption process. The Zn2Al-layered double hydroxide prepared from secondary sources presents similar morphological and structural characteristics as those prepared from analytical grade reagents. The influence of initial dye concentration, adsorption time, solid:liquid ratio, pH, and temperature was evaluated in order to confirm the benefit of this waste valorization. A comparison with the reference Zn2Al-layered double hydroxide prepared from analytical grade reagents was performed and the results show that due to the small presence of impurities, the material prepared from zinc ash shows better adsorption capacities (qmax,exp = 42.5 mg/g at 293 K) than the material prepared from reagents (qmax,exp = 36.9 mg/g at 293 K), justifying the utilization of secondary sources for layered double hydroxides preparation. The proposed treatment process presents advantages from both economic and environmental protection point of view.Keywords
This publication has 51 references indexed in Scilit:
- Modeling of sorption kinetics: the pseudo-second order equation and the sorbate intraparticle diffusivityAdsorption, 2013
- Synthesis of hydrotalcite by neutralization of bauxite residue mud leachate with acidic saline drainage waterApplied Clay Science, 2012
- Effects of Orange II and Sudan III azo dyes and their metabolites on Staphylococcus aureusJournal of Industrial Microbiology and Biotechnology, 2011
- Removal of Congo Red from aqueous solution by cattail rootJournal of Hazardous Materials, 2010
- Adsorption kinetics and thermodynamics of azo-dye Orange II onto highly porous titania aerogelChemical Engineering Journal, 2009
- Adsorption characteristics of Orange II and Chrysophenine on sludge adsorbent and activated carbon fibersJournal of Hazardous Materials, 2009
- Process development for the batch and bulk removal and recovery of a hazardous, water-soluble azo dye (Metanil Yellow) by adsorption over waste materials (Bottom Ash and De-Oiled Soya)Journal of Hazardous Materials, 2008
- Adsorption of acid orange 7 dye in aqueous solutions by spent brewery grainsSeparation and Purification Technology, 2004
- Textural properties of layered double hydroxides: effect of magnesium substitution by copper or ironMicroporous and Mesoporous Materials, 2001
- Hydrotalcite-type anionic clays: Preparation, properties and applications.Catalysis Today, 1991