An Experimental Investigation on the Performance of a Water Storage Tank with Sodium Acetate Trihydrate
Open Access
Abstract
Phase change material (PCM) water tanks have a major influence on the efficiency improvement of solar energy systems. This article discusses the effects of PCM under various inlets in a tank based on related research. So as to research the performance of the water storage tank, this paper built a set of water tank experimental systems using sodium acetate trihydrate. The thermal characteristics of two different water tanks were analyzed at 2, 6 and 10 L/min when the inlet temperature was 20 °C and the initial high temperature was 80 °C. The test results indicate that adding PCMs helps to provide an extra 1.4% of stored heat, prolong the hot water outlet time, and has a better thermal stratification, compared with ordinary water tanks. However, PCMs do not give off heat quickly at high flow rates. Besides the exergy efficiency (EE) gradually decreasing, the MIX number first decreases and then increases; the fill efficiency (FE) has the opposite trend with the flow increasing. FE has a max of 0.905 at 6 L/min.Keywords
Funding Information
- Special Project of Biomedical Science and Technology Support of Shanghai Science and Technology Innovation Action Plan (21S31900200, 20ZR1438600, YDZX20213100003002, 21126NSH)
- Natural Science Foundation of Shanghai Municipality (21S31900200, 20ZR1438600, YDZX20213100003002, 21126NSH)
- Open Project of the Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering and the Central Guidance on Local Science and Technology Development Fund of Shanghai City (21S31900200, 20ZR1438600, YDZX20213100003002, 21126NSH)
- Special Project of Independent Innovation of Qingdao City (21S31900200, 20ZR1438600, YDZX20213100003002, 21126NSH)
This publication has 29 references indexed in Scilit:
- Numerical simulation of three-dimensional flow dynamics in a hot water storage tankApplied Energy, 2009
- Energy and exergy analysis of a latent heat storage system with phase change material for a solar collectorRenewable Energy, 2008
- Numerical model and experimental validation of heat storage with phase change materialsEnergy and Buildings, 2007
- Modelization of a water tank including a PCM moduleApplied Thermal Engineering, 2006
- Experimentation with a water tank including a PCM moduleSolar Energy Materials and Solar Cells, 2006
- Effect of obstacles on thermal stratification in hot water storage tanksApplied Thermal Engineering, 2005
- Latent Heat Storage Materials and Systems: A ReviewInternational Journal of Green Energy, 2005
- Review on thermal energy storage with phase change: materials, heat transfer analysis and applicationsApplied Thermal Engineering, 2003
- Mixing in thermally stratified energy storesSolar Energy, 1996
- Fabric Stratification Manifolds for Solar Water HeatingJournal of Solar Energy Engineering, 1994