Low‐profile mechanisms in a PVAc/polyester blend
- 27 January 2006
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 46 (3) , 303-313
Abstract
The different steps associated with the curing of a PVAc/polyester blend are identified and correlated to the mechanism of shrinkage control in the presence of a low‐profile additive (LPA). Poly(vinyl acetate) (PVAc) is used as a LPA and is shown to induce a phase separation upon curing that leads to an interconnected globule morphology. This morphology strongly modifies the rheokinetics of the blend compared to that of the neat polyester resin. In particular, the presence of PVAc delays the cure kinetics and the gel time. A comparison between these delays, called shift times, demonstrates an increase in the gel conversion of polyester in the presence of PVAc. This, coupled to the thermal expansion of PVAc at the early stages of curing, contributes to the low‐profile effect. Microvoids in the LPA‐rich phase, which are believed to play a key role in the mechanism of shrinkage control, are efficient at the later stages of curing and during cooling and complete the low‐profile effect. However, it is also shown that the formation of microvoids may indirectly induce macroscopic voids that could be at the origin of pinholes at the surface of the parts molded with this material. POLYM. ENG. SCI. 46:303–313, 2006. © 2006 Society of Plastics EngineersKeywords
This publication has 15 references indexed in Scilit:
- Control of shrinkage and residual styrene of unsaturated polyester resins cured at low temperatures: I. Effect of curing agentsPolymer, 2003
- Current Status of Unsaturated Polyester ResinsJournal of Macromolecular Science, Part C: Polymer Reviews, 2000
- Microvoids in unsaturated polyester resins containing poly(vinyl acetate) and composites with calcium carbonate and glass fibersPolymer, 2000
- Effects of poly(vinyl acetate) and poly(methyl methacrylate) low-profile additives on the curing of unsaturated polyester resins. I. Curing kinetics by DSC and FTIRJournal of Applied Polymer Science, 1995
- Shrinkage behaviour of low-profile unsaturated polyester resinsPolymer, 1994
- Structure formation during the copolymerization of styrene and unsaturated polyester resinPolymer, 1991
- Mechanism of shrinkage control in polyester resins containing low-profile additivesPolymer, 1991
- Linear Viscoelasticity at the Gel Point of a Crosslinking PDMS with Imbalanced StoichiometryJournal of Rheology, 1987
- Analysis of Linear Viscoelasticity of a Crosslinking Polymer at the Gel PointJournal of Rheology, 1986
- Kinetics of free radical polymerizations in reactive polymer processingAIChE Journal, 1985