Development of a novel toughener for epoxy resins
- 3 June 2009
- journal article
- research article
- Published by Wiley in Polymer International
- Vol. 58 (7) , 838-845
Abstract
BACKGROUND: Conventional tougheners for brittle epoxy resins form micrometre‐sized particles with ineffective interfaces, and meet toughening requirements with 10–20 wt% of toughener, which unfortunately causes deterioration of other desirable properties.RESULTS: We developed a novel polyurea toughener using a facile synthesis method from isophorone diisocyanate and polyoxyalkyleneamine. Polyurea forms thick‐interface particles, and creates an effective toughness improvement: 265% increase in fracture energy release rate. More importantly, polyurea causes no deterioration of other important properties. Different from conventional epoxy/rubber or epoxy/thermoplastic composites, the epoxy/polyurea composite shows Newtonian rheological behaviour, a convenient property for processing.CONCLUSION: This study describes a novel polyurea toughener. Its unique feature is that toughness can be significantly improved at low toughener content (5 wt%) without losing other desirable properties. The study illuminates the importance of the interface for toughening in polymer blends/composites. Copyright © 2009 Society of Chemical IndustryKeywords
This publication has 36 references indexed in Scilit:
- Study of epoxy toughened by in situ formed rubber nanoparticlesJournal of Applied Polymer Science, 2008
- Development of SENB toughness measurement for thermoset resinsPolymer Testing, 2007
- Deformation mechanism of polystyrene toughened with sub‐micrometer monodisperse rubber particlesPolymer International, 2006
- Synthesis and evaluation of liquid amine-terminated polybutadiene rubber and its role in epoxy tougheningJournal of Applied Polymer Science, 2005
- Effects of perfluoroether concentration and curing protocol on morphology and mechanical properties of toughened TGDDM/MNA resin systemsPolymer, 2003
- A fractographic study on toughening of epoxy resin using ground tyre rubberPolymer, 2001
- Effects of rubber‐rich domains and the rubber‐plasticized matrix on the fracture behavior of liquid rubber‐modified araldite‐F epoxiesPolymer Engineering & Science, 2000
- Toughening of epoxy resins modified with polyetherester block copolymers: the influence of modifier molecular architecture on mechanical propertiesJournal of Applied Polymer Science, 2000
- The importance of constraint relief caused by rubber cavitation in the toughening of epoxyJournal of Materials Science, 1993
- Influence of particle size and particle size distribution on toughening mechanisms in rubber-modified epoxiesJournal of Materials Science, 1991