Epitaxy‐free monocrystalline silicon thin film: first steps beyond proof‐of‐concept solar cells
Authors:
- 10 November 2010
- journal article
- research article
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 19 (7) , 844-850
Abstract
The “Epifree” process involves the lift‐off of a high‐quality monocrystalline film formed by reorganization upon annealing of cylindrical macropore arrays in silicon, and can thus provide high‐quality silicon films without resorting to costly epitaxy. The challenge of this new process lies in etching controlled and regular pores in silicon in a cost‐efficient way, and in developing a process compatible with the difficulty of handling a micron‐thin material. Proof‐of‐concept cells have previously been achieved and this paper presents the latest progress, with a first development of thicker films and the inclusion of rear‐side passivation. The energy‐conversion efficiency of 1‐µm‐thin Epifree cells was improved from 2.6 to 4.1% by depositing a stack of amorphous silicon (a‐Si) layers as rear‐side passivation. The increase in Voc was, however, limited and bound to a drop in Jsc. The choice of a‐Si was revealed to be unsuitable because of the thinness of the film and the presence of a full aluminum rear contact. The thinness of the film leads to a decrease in rear‐side reflectivity by the a‐Si absorption, and the aluminum, although not leading to crystallization, partly migrates inside the a‐Si stack upon anodic bonding as shown by TEM. These factors indicate that an alternative surface passivation should be developed. In parallel to process developments, the material was thickened by modifying the macropore array dimensions, leading to a 2.4‐µm‐thick material over 1 cm × 1 cm areas. The efficiency of the next cells is expected to increase with this thicker material. Copyright © 2010 John Wiley & Sons, Ltd.Keywords
This publication has 9 references indexed in Scilit:
- Large-area monocrystalline silicon thin films by annealing of macroporous arrays: Understanding and tackling defects in the materialJournal of Applied Physics, 2009
- 50μm thin solar cells with 17.0% efficiencySolar Energy Materials and Solar Cells, 2009
- Proof of concept of an epitaxy-free layer-transfer process for silicon solar cells based on the reorganisation of macropores upon annealingMaterials Science and Engineering: B, 2009
- Modeling of Morphological Changes by Surface Diffusion in Silicon TrenchesECS Transactions, 2006
- Fabrication of Silicon-on-Nothing Structure by Substrate Engineering Using the Empty-Space-in-Silicon Formation TechniqueJapanese Journal of Applied Physics, 2004
- Empty-space-in-silicon technique for fabricating a silicon-on-nothing structureApplied Physics Letters, 2000
- The limits of macropore array fabricationThin Solid Films, 1997
- Nanoimprint lithographyJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1996
- Aluminum-induced crystallization and counter-doping of phosphorous-doped hydrogenated amorphous silicon at low temperaturesJournal of Applied Physics, 1996