Melting of PCM in a thermal energy storage unit: Numerical investigation and effect of nanoparticle enhancement
- 18 October 2012
- journal article
- research article
- Published by Hindawi Limited in International Journal of Energy Research
- Vol. 37 (13) , 1610-1623
Abstract
The present paper describes the analysis of the melting process in a single vertical shell-and-tube latent heat thermal energy storage (LHTES), unit and it is directed at understanding the thermal performance of the system. The study is realized using a computational fluid-dynamic (CFD) model that takes into account of the phase-change phenomenon by means of the enthalpy method. Fluid flow is fully resolved in the liquid phase-change material (PCM) in order to elucidate the role of natural convection. The unsteady evolution of the melting front and the velocity and temperature fields is detailed. Temperature profiles are analyzed and compared with experimental data available in the literature. Other relevant quantities are also monitored, including energy stored and heat flux exchanged between PCM and HTF. The results demonstrate that natural convection within PCM and inlet HTF temperature significantly affects the phase-change process. Thermal enhancement through the dispersion of highly conductive nanoparticles in the base PCM is considered in the second part of the paper. Thermal behavior of the LHTES unit charged with nano-enhanced PCM is numerically analyzed and compared with the original system configuration. Due to increase of thermal conductivity, augmented thermal performance is observed: melting time is reduced of 15% when nano-enhanced PCM with particle volume fraction of 4% is adopted. Similar improvements of the heat transfer rate are also detected. Copyright © 2012 John Wiley & Sons, Ltd.Keywords
This publication has 34 references indexed in Scilit:
- Analysis of the influence of operating conditions and geometric parameters on heat transfer in water-paraffin shell-and-tube latent thermal energy storage unitApplied Thermal Engineering, 2006
- Experimental and numerical study of melting in a cylinderInternational Journal of Heat and Mass Transfer, 2006
- Melting in a side heated tall enclosure by a uniformly dissipating heat sourceInternational Journal of Heat and Mass Transfer, 2001
- Conceptions for heat transfer correlation of nanofluidsInternational Journal of Heat and Mass Transfer, 2000
- Performance of a thermal storage system of the vertical tube typeEnergy Conversion and Management, 2000
- Numerical simulation of a shell-and-tube latent heat thermal energy storage unitSolar Energy, 1993
- Melting in an enclosure heated at constant rateInternational Journal of Heat and Mass Transfer, 1989
- Scaling theory of melting with natural convection in an enclosureInternational Journal of Heat and Mass Transfer, 1988
- A fixed grid numerical modelling methodology for convection-diffusion mushy region phase-change problemsInternational Journal of Heat and Mass Transfer, 1987
- Inward Melting in a Vertical Tube Which Allows Free Expansion of the Phase-Change MediumJournal of Heat Transfer, 1982