Effect of EPDM as a compatibilizer on mechanical properties and morphology of PP/LDPE blends
- 22 October 2012
- journal article
- research article
- Published by SAGE Publications in Journal of Elastomers & Plastics
- Vol. 45 (4) , 391-403
Abstract
Blends of polypropylene (PP) and low-density polyethylene (LDPE) with and without ethylene-propylene-diene (EPDM) terpolymer as a compatibilizer were studied. Mechanical properties were chosen to estimate the compatibilization efficiency of EPDM. The interactions between phases were valued through glass transition shifts in dynamic mechanical spectra, and morphology of the blends was obtained using scanning electron microscopy. Interfacial adhesion was improved by EPDM addition. Addition of EPDM to PP/LDPE blends improved mechanical properties, especially Izod impact strength in LDPE-rich blends and with higher EPDM content.Keywords
This publication has 27 references indexed in Scilit:
- Compatibilization effects of block copolymers in high density polyethylene/syndiotactic polystyrene blendsPolymer, 2002
- Miscibility and isothermal crystallisation of polypropylene in polyethylene meltsPolymer, 2001
- Theory for the Phase Behavior of Polyolefin Blends: Application to the Polyethylene/Isotactic Polypropylene BlendMacromolecules, 1995
- A review of polyethylene–polypropylene blends and their compatibilizationAdvances in Polymer Technology, 1994
- Structure and properties of polyethylene–polypropylene blendJournal of Applied Polymer Science, 1983
- Mechanical properties of blends containing HDPE and PPJournal of Applied Polymer Science, 1982
- Tensile properties and morphology of blends of polyethylene and polypropyleneJournal of Applied Polymer Science, 1980
- The Glass Temperature of Linear PolyethyleneMacromolecules, 1970
- Glass transitions in ethylene copolymers and vinyl homopolymers and copolymersJournal of Polymer Science, 1962
- Effect of branching on dynamic mechanical properties of polyethyleneJournal of Polymer Science, 1956