Nondestructive Inspection for Steel Billet Using Phase-Modulated Signal by Gold Sequence for Improving Measurement Speed
Authors:
- Yoko NoroseYNYoko Norose
- 1 July 2012
- journal article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 51 (7S) , 07GB17
Abstract
We have proposed an ultrasonic computerized tomography method using the time-of-flight (TOF) of a longitudinal wave as a defect detection method for a steel billet. However, it took a long time to measure the TOFs because the transmissions were made one by one from the requirement of independent signal transmission. In this study, to speed up the TOF measurement, we proposed a simultaneous measurement method of TOFs using the phase-modulated signals by Gold sequences, and evaluated the ability of simultaneous measurement by an experiment. The reflected wave from the billet surface had a very adverse effect on the measurement of TOF, so a short signal was required as the transmitted signal. To make the transmitted signal short, a half-sine pulse phase-modulated by a Gold sequence was employed. As a result, five simultaneous transmissions were possible to be used for the inspection of the billet. When five simultaneous transmissions are made, the total measurement time can be decreased to 1/5 of the previous one.Keywords
This publication has 25 references indexed in Scilit:
- Artifact Reduction in Tomographic Images for Nondestructive Testing of Square Billets Using Ultrasonic Computerized TomographyJapanese Journal of Applied Physics, 2011
- Optimal Transducer Arrangement for Temperature Distribution Measurement in Arbitrary Convex-Shaped Space by Acoustic Computerized TomographyJapanese Journal of Applied Physics, 2010
- Detection of Internal Cracks in Square Billets Using Time of Flight of Longitudinal WavesJapanese Journal of Applied Physics, 2009
- Temperature Distribution Measurement with Acoustic Computerized Tomography Using Rectangular Arrangement of TransducersJapanese Journal of Applied Physics, 2009
- Measurements of Wind Velocity and Direction Using Acoustic Reflection against WallJapanese Journal of Applied Physics, 2008
- Target Detectability Using Coded Acoustic Signal in Indoor EnvironmentsJapanese Journal of Applied Physics, 2008
- Automatic Interference Elimination Algorithm for Ultrasonic Multiple Access MethodJapanese Journal of Applied Physics, 2008
- Temperature Distribution Measurement Using Reflection with Acoustic Computerized TomographyJapanese Journal of Applied Physics, 2008
- Underground Imaging Method Using Magnified Cross-Correlation AnalysisJapanese Journal of Applied Physics, 2008
- Ultrasonic Evaluation of Closed Cracks Using Subharmonic Phased ArrayJapanese Journal of Applied Physics, 2008