Optimization of Surfactant Concentration in Carbon Nanotube Solutions for Dielectrophoretic Ceiling Assembly and Alignment: Implications for Transparent Electronics
Open Access
- 18 January 2022
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 7 (4) , 3680-3688
Abstract
Surfactants such as sodium dodecyl sulfate (SDS) are used to improve the dispersity of carbon nanotubes (CNTs) in aqueous solutions. The surfactant concentration in CNT solutions is a critical factor in the dielectrophoretic (DEP) manipulation of CNTs. A high surfactant concentration causes a rapid increase in the solution conductivity, while a low concentration results in undesirably large CNT bundles within the solution. The increase in the solution conductivity causes drag velocity that obstructs the CNT manipulation process due to the electrothermal forces induced by the electric field. The presence of large CNT bundles is undesirable since they degrade the device performance. In this work, mathematical modeling and experimental work were used to optimize the concentration of the SDS surfactant in multiwalled carbon nanotube (MWCNT) solutions. The solutions were characterized using dynamic light scattering (DLS) and ultraviolet–visible spectroscopy (UV–Vis) analysis. We found that the optimum SDS concentration in MWCNT solutions for the successful DEP manipulation of MWCNTs was between 0.1 and 0.01 wt %. A novel DEP configuration was then used to assemble MWCNTs across transparent electrodes. The configuration was based on ceiling deposition, where the electrodes were on top of a droplet. The newly proposed configuration reduced the drag velocity and prevented the assembly of large MWCNT bundles. MWCNTs were successfully assembled and aligned across interdigitated electrodes (IDEs). The assembly of MWCNTs from aqueous solutions across transparent electrodes has potential use in future transparent electronics and sensor devices.Keywords
Funding Information
- Universiti Putra Malaysia (GPB/2017/9563800)
This publication has 38 references indexed in Scilit:
- Effect of solution conductivity and electrode shape on the deposition of carbon nanotubes from solution using dielectrophoresisNanotechnology, 2012
- Dispersion of Carbon Nanotubes: Mixing, Sonication, Stabilization, and Composite PropertiesPolymers, 2012
- Aqueous dispersion of surfactant-modified multiwalled carbon nanotubes and their application as an antibacterial agentCarbon, 2011
- Dispersion of carbon nanotubes with SDS surfactants: a study from a binding energy perspectiveChemical Science, 2011
- Effects of polymer wrapping and covalent functionalization on the stability of MWCNT in aqueous dispersionsJournal of Colloid and Interface Science, 2011
- Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: A reviewComposites Part A: Applied Science and Manufacturing, 2010
- Current Progress on the Chemical Modification of Carbon NanotubesChemical Reviews, 2010
- Controlling the Carbon Nanotube-to-Medium Conductivity Ratio for Dielectrophoretic SeparationLangmuir, 2009
- Dielectrophoresis of Surface Conductance Modulated Single-Walled Carbon Nanotubes Using Catanionic SurfactantsThe Journal of Physical Chemistry B, 2006
- Ac electrokinetics: a survey of sub-micrometre particle dynamicsJournal of Physics D: Applied Physics, 2000