Effect of Surface Treatments and Thermal Aging on Bond Strength Between Veneering Resin and CAD/CAM Provisional Materials
Authors:
- Ali RobaianARAli Robaian
- Abdullah AlShehriAAAbdullah AlShehri
- Nasser Raqe AlqhtaniNANasser Raqe Alqhtani
- Abdulellah AlmudahiAAAbdulellah Almudahi
- Khalid K AlanaziKAKhalid K Alanazi
- Mohammed A S AbuelqomsanMAMohammed A S Abuelqomsan
- Eman Mohamed RaffatEREman Mohamed Raffat
- Ali ElkaffasAEAli Elkaffas
- Qamar Mohammadziad HashemQHQamar Mohammadziad Hashem
- Tarek Ahmed SolimanTSTarek Ahmed Soliman
Preprint
- 8 January 2025
- preprint
- Published by MDPI AG in Preprints.org
Abstract
The oral environment significantly influences the aesthetic appearance of CAD/CAM provisional restorative materials. Therefore, a veneering layer is required. However, bonding veneering resin composites to these materials is challenging, especially when exposed to thermal aging. This study assessed the effect of different surface treatments and thermal aging on bond strength between veneering resin and CAD/CAM provisional materials. Provisional materials specimens including CAD-Temp, Everest C-Temp, and PEEK were randomly allocated to five groups. Group C: without any surface treatments. DB: mechanically roughened using a diamond bur; DB+TC: DB group with 5000 cycles of thermocycling; SB: aluminum oxide airborne abraded; SB+TC: SB group, along with 5000 cycles of thermocycling. Following the surface treatments, the specimens received primer and resin veneering composite. The bond strength (SBS) was evaluated. C-Temp in the SB group exhibited the highest SBS values (MPa), while CAD-Temp in the C group showed the lowest values. PEEK recorded significantly higher SBS in DB+TC and SB+TC groups than CAD-Temp in DB+TC and SB+TC. C-Temp exhibited higher SBS without surface treatment, whereas PEEK showed higher SBS after diamond bur roughening and air particle abrasion. Thermocycling significantly reduced bond strength in all materials except for PK material in the air particle abrasion group.Keywords
All Related Versions
- Version 1, 2025-01-08, Preprints
- Published version: Polymers, 17 (5), 563.
This publication has 35 references indexed in Scilit:
- Effect of surface treatments and flash-free adhesive on the shear bond strength of ceramic orthodontic brackets to CAD/CAM provisional materialsClinical Oral Investigations, 2021
- Influence of accelerated ageing on the physical properties of CAD/CAM restorative materialsClinical Oral Investigations, 2019
- Comparison of interim restorations fabricated by CAD/CAM with those fabricated manuallyThe Journal of Prosthetic Dentistry, 2015
- Repairability of CAD/CAM high-density PMMA- and composite-based polymersClinical Oral Investigations, 2015
- An update on glass fiber dental restorative composites: A systematic reviewMaterials Science and Engineering: C, 2015
- The effect of different surface treatments on the bond strength of PEEK composite materialsDental Materials, 2014
- Load-bearing capacity of CAD/CAM milled polymeric three-unit fixed dental prostheses: Effect of aging regimensClinical Oral Investigations, 2012
- Effect of different surface pre-treatments and luting materials on shear bond strength to PEEKDental Materials, 2010
- Effects of surface treatment and aging on the bond strength of orthodontic brackets to provisional materialsAmerican Journal of Orthodontics and Dentofacial Orthopedics, 2007
- Effects of ceramic surface treatments on the bond strength of an adhesive luting agent to CAD–CAM ceramicJournal of Dentistry, 2007