In Situ Synthesis of Ultrafine ZrB2–SiC Composite Powders and the Pressureless Sintering Behaviors
Authors:
- 2 April 2008
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 91 (4) , 1372-1376
Abstract
Ultrafine ZrB2–SiC composite powders have been synthesized in situ using carbothermal reduction reactions via the sol–gel method at 1500°C for 1 h. The powders synthesized had a relatively smaller average crystallite size (2/g), and a lower oxygen content (∼1.0 wt %). Composites of ZrB2+20 wt% SiC were pressureless sintered to ∼96.6% theoretical density at 2250°C for 2 h under an argon atmosphere using B4C and Mo as sintering aids. Vickers hardness and flexural strength of the sintered ceramic composites were 13.9±0.3 GPa and 294±14 MPa, respectively. The microstructure of the composites revealed that elongated SiC grain dispersed uniformly in the ZrB2 matrix. Oxidation from 1100° to 1600°C for 30 min showed no decrease in strength below 1400°C but considerable decrease in strength with a rapid weight increment was observed above 1500°C. The formation of a protective borosilicate glassy coating appeared at 1400°C and was gradually destroyed in the form of bubble at higher temperatures.Keywords
This publication has 19 references indexed in Scilit:
- Effect of hot pressing time and temperature on the microstructure and mechanical properties of ZrB2–SiCJournal of Materials Science, 2007
- Influence of silicon carbide particle size on the microstructure and mechanical properties of zirconium diboride–silicon carbide ceramicsJournal of the European Ceramic Society, 2007
- Beneficial effects of an ultra-fine α-SiC incorporation on the sinterability and mechanical properties of ZrB2Applied Physics A, 2005
- Development and characterization of metal-diboride-based composites toughened with ultra-fine SiC particulatesSolid State Sciences, 2005
- High‐Strength Zirconium Diboride‐Based CeramicsJournal of the American Ceramic Society, 2004
- Oxidation of ZrB[sub 2]-Based Ceramics in Dry AirJournal of the Electrochemical Society, 2003
- Processing and properties of zirconium diboride-based compositesJournal of the European Ceramic Society, 2002
- Effect of the addition of silicon nitride on sintering behaviour and microstructure of zirconium diborideScripta Materialia, 2002
- Microstructure and Properties of ZrB2-Based CeramicsJournal of Materials Processing & Manufacturing Science, 2000
- Effect of zirconium carbide and carbon additions on some physicomechanical properties of zirconium diboridePowder Metallurgy and Metal Ceramics, 1980