A Novel Measurement Method for Investigating the Lift-Off Behavior of Gas Polymer Bearings
Authors:
- 23 December 2025
- journal article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 148 (6)
Abstract
Gas polymer bearings (GPBs) are innovative machine elements for supporting high-speed rotors in oil-free turbomachinery applications. By using air as the lubricating medium, GPBs operate without contamination from lubricating oil. This property makes GPBs eminently suitable for use as bearings in air compressors of fuel cell systems. In operating scenarios with frequent start–stop cycles, the utilization of GPBs can result in increased wear during the run-up and coast-down phases and lead to a shorter service life. The measurement of frictional torque in order to determine the rotor lift-off and touch-down speeds is of great importance for investigating the lift-off behavior. This paper presents a novel experimental method for measuring the frictional torque of GPBs. Existing test rigs feature undesirable friction in their design, which introduces measurement deviations, or stand out due to a complex design to compensate for errors such as parasitic loads, making the measurement results difficult to interpret. The new test rig addresses these problems and leads to more precise results with a reduced level of complexity. The method used to apply the static bearing load and the direct mounting of the investigated GPB on load cells represent the unique features of this study. This novel method has the potential of being established as a new standard for future investigations of lift-off behavior of GPBs and gas foil bearings (GFBs). The experimental results are compared to the results of the commonly used measurement method, in order to demonstrate the improvement.Keywords
This publication has 12 references indexed in Scilit:
- Development and Performance Measurements of Gas Foil Polymer Bearings with a Dual-Rotor Test Rig Driven by Permanent Magnet Electric MotorApplied Sciences, 2022
- An experimental investigation on the influence of an assembly preload on the hysteresis, the drag torque, the lift-off speed and the thermal behavior of three-pad air foil journal bearingsTribology International, 2019
- Performance Measurements of Gas Bearings With High Damping Structures of Polymer and Bump Foil Via Electric Motor Driving Tests and One Degree-of-Freedom Shaker Dynamic Loading TestsJournal of Engineering for Gas Turbines and Power, 2017
- A Metal Mesh Foil Bearing and a Bump-Type Foil Bearing: Comparison of Performance for Two Similar Size Gas BearingsJournal of Engineering for Gas Turbines and Power, 2012
- Experimental Analyses of a First Generation Foil Bearing: Startup Torque and Dynamic CoefficientsJournal of Engineering for Gas Turbines and Power, 2011
- Measurements of Drag Torque, Lift-Off Journal Speed, and Temperature in a Metal Mesh Foil BearingJournal of Engineering for Gas Turbines and Power, 2010
- Dynamic characteristics of a flexible rotor system supported by a viscoelastic foil bearing (VEFB)Tribology International, 2004
- Experimental Study of a New Compliant Foil Air Bearing with Elastic SupportTribology Transactions, 2004
- Comparative test on two kinds of new compliant foil bearing for small cryogenic turbo-expanderCryogenics, 2004
- The Role of Radial Clearance on the Performance of Foil Air BearingsTribology Transactions, 2002