Electrochemical Behavior of Metals Used in Drinking Water Distribution Systems: A Rotating Cylinder Electrode's Study
Authors:
- J.F. RiosJRJ.F. Rios
- J.A. CalderónJCJ.A. Calderón
- R.P. NogueiraRNR.P. Nogueira
- 16 April 2013
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 69 (9) , 875-885
Abstract
The corrosion behavior of electrolytic copper (>99.5% purity [UNS C11000]), carbon steel (AISI/SAE 1016 [(UNS G10160]), and Type 304 (UNS S30400) stainless steel in neutral tap water was examined by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) using a rotating cylinder electrode (RCE). The instantaneous corrosion rates determined from polarization curves were 0.2, 15, and 140 μm y−1 for stainless steel, copper, and carbon steel, respectively. These values were found to be consistent with those reported by the weight-loss method, thereby allowing RCE to be used for the rapid estimation of corrosion rates. Results showed that the corrosion behavior is not directly dependent on hydrodynamic conditions even under turbulent flow. The corrosion resistance does not seem to be related to the intrinsic reactivity of each metal but rather to the oxide film structure on the metal surface. The low resistance of carbon steel, hence, is caused by the formation of a porous layer that does not prevent metal dissolution. In the case of copper, the corrosion process is controlled by the formation of a stable oxide film. Finally, stainless steel showed a very low corrosion rate because of a passive protective layer on its surface.Keywords
This publication has 40 references indexed in Scilit:
- Passivity and Pit Stability Behavior of Copper as a Function of Selected Water Chemistry VariablesJournal of the Electrochemical Society, 2009
- The effect of Ni in the electrochemical properties of oxide layers grown on stainless steelsElectrochimica Acta, 2006
- EIS study on corrosion and scale processes and their inhibition in cooling system mediaElectrochimica Acta, 2006
- Impedance investigation of passive 304 stainless steel in the pit pre-initiation stateElectrochimica Acta, 2005
- The Rotating Cylinder Electrode for Examining Velocity-Sensitive Corrosion—A ReviewCorrosion, 2004
- Copper corrosion in potable water distribution systems: influence of copper products on the corrosion behaviorMaterials Letters, 2004
- Copper Dissolution in NaHCO3 and NaHCO3 + NaCl Aqueous Solutions at pH 8Journal of the Electrochemical Society, 1992
- Electrochemical Impedance Technique — A Practical Tool for Corrosion PredictionCorrosion, 1988
- Application of the Rotating Cylinder Electrode—E-Brite 26-1/Concentrated Sulfuric AcidCorrosion, 1986
- Rotating Cylinder Electrode for Velocity Sensitivity TestingCorrosion, 1984