Smooth Top-Down Photoelectrochemical Etching of m-Plane GaN

Authors:

Abstract
Photoelectrochemical (PEC) etching of cc -plane GaN has been studied extensively because it is one of only a few available damage-free wet-etching techniques for this material system. Because of its nonpolar nature and low defect density, mm -plane GaN may benefit from PEC etching even more than cc -plane GaN has. With mm -plane GaN, it is possible to achieve smooth, controllable etching, bandgap-selective top-down etching, and deep, anisotropic etching. We have investigated PEC etching of mm -plane GaN in KOH and HNO3HNO3 and have found etch rates ranging from less than 10nm∕min10nm∕min to more than 1μm∕min1μm∕min , with roughness that is crystallographic in nature but small in scale. Etch selectivity of 60:1 between In0.1Ga0.9NIn0.1Ga0.9N and GaN is observed using PEC etching with filtered light. Anisotropic etching to depths as great as 75μm75μm was achieved, with the sidewall profile of the etch controlled by the direction of incident light.

This publication has 29 references indexed in Scilit: